Ford Mustang Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
23,216 Posts
driver side, way to narrow that down
 

·
Registered
Joined
·
35 Posts
Discussion Starter #3
It's a 1992 LX . It's just weird because all these wires are going into the connector, but it seems like there is no way to plug it into something. It has like an OEM cap on it. Really weird. Only letters I made out on the connector are EPC
 

·
Registered
Joined
·
23,216 Posts
It's a 1992 LX . It's just weird because all these wires are going into the connector, but it seems like there is no way to plug it into something. It has like an OEM cap on it. Really weird. Only letters I made out on the connector are EPC
what's really weird, is that don't read posts
 

·
Registered
Joined
·
1,687 Posts
I would not cut it .
It is tied into your high beams .
Just tuck it back out of sight .
That cap i believe has a jumper in it , maybe not, as i have not looked at one in quite a while .
I no longer have a stock fox mustang , ( Cobra Swap )
You may need to join 2 wires to replicate that plug.
I always prefer to not cut things out , with out knowing what it is , and if tbere will be unintended
consequences .
If you cant see it with the hood open , leave well enough alone .
 

·
Registered
Joined
·
23,216 Posts
its for a DRL module, when needed

what year is this car?
 
1 - 12 of 12 Posts
Top