Ford Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,654 Posts
Discussion Starter #1
Anyone pieced this together themselves? The kit I purchased doesn't have any of these pieces so trying to toss it together myself.

Saw Superchargersonline had the SS oil feed nozzle.

Aside from that, I'm not really sure where to start. This is for my s-trim going on a 94 GT.
 

·
Registered
Joined
·
1,654 Posts
Discussion Starter #2
Hoping someone can confirm if this looks okay. I already had AN fittings at the block since I have a oil pressure gauge setup.

That said, working my way from the block to blower -

3an – 3an Tee fitting
https://www.summitracing.com/parts/vpe-10740

Adapter from Tee - 3an to 4an
https://www.summitracing.com/parts/fra-497304-bl

Oil line – 4an – 30”
https://www.summitracing.com/parts/fra-360030

45 degree – oil line to oil feed nozzle
https://www.summitracing.com/parts/vpe-10571

Stainless oil feed nozzle
Vortech Stainless Steel Oil Feed Nozzle and Crush Washer Vortech Stainless Steel Oil Feed Nozzle and Crush Washer [V8R100-002] - $65.99 : SuperchargersOnline, Worlds largest Supercharger Resource. Get Serious About Power
 

·
Registered
Joined
·
967 Posts
I bought the superchargers online kit. Comes with everything you need.
 

·
Registered
Joined
·
1,654 Posts
Discussion Starter #4
Saw that kit but didn't want the red line, plus wanted black fittings to match my other ones.
 

·
Registered
Joined
·
967 Posts
1 - 5 of 5 Posts
Top