Ford Mustang Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter #1
I've been planning on building a 408 for my notch but some have turned me to turbo,I wanted to turbo my car at first but it's carbed and I've herd blow thru setups are not reliable etcc... But I've been doing some research and I am gonna try the on3 performance kit for the foxbodys with a 351 ,I no the on3 guys are on here and hoping they will chime in and answer some of my ? About the kit I have never had a turbo before but have all kinds of friends who are boosted so I'm no stranger to how everything works,just want some advice on what I will be in for ,and what will my power be with a mild Windsor,bored 30 over,decent cam etc,or whts the best setup for this like what should my cr be?

Sent from my PI86100 using Board Express
 

·
Registered
Joined
·
1 Posts
i have a 347 stroker, was thinking of doing the same, a 351w roller block. They hold much better (hp wise). keeping my mild port gt40 iron heads and tfs stage 2 cam, with ported gt40 intake. And with an on3 kit...it will be a monster!!! I seen a vid on youtube of a turbo 351 and its badass.

P.S.-use low compression pistons.:salute:
 
1 - 3 of 3 Posts
Top