Ford Mustang Forums banner

On3 turbo drain hose?

9K views 14 replies 6 participants last post by  Mclaren87 
#1 ·
Guys that have a fox on3 kit, how in the world are you running your drain line? Theres like no room between the hot and cold pipes to run it
 
#2 ·
I didn't have any problems, I forgot the way it routes off hand, but we did things a bit differently. My buddy suggested to go to hardware store and buy a threaded pipe that threads into the oil drain flange on the turbo. The pipe is about.. 6" long or so. That way I don't have a rubber hose so close to the hotside. We connected the hose to the end of the 6" pipe, hopefully it drains adequately enough. I can get pics tomorrow prolly if you would like to see.
 
#14 ·
I wasnt comfortable running the cheap oil line that was provided, its so dang close to the hot pipes and this seams like it will work just fine. Couldve used an fittings, but theres no pressure in this line so hose clamp outa suffice
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top