Ford Mustang Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,840 Posts
Discussion Starter #1 (Edited)
Sold. Thanks Corral.

Near new Comp Solid Roller Cam (Part No. 35-772-8) and Morel Roller Lifters, excellent condition, only approx. 10 passes on the cam and maybe 100 street miles. Asking $475.

The parts are off my 410w that ran 10.99 in the 1/4 and 6.98 in the 1/8th. Cam has a great aggressive sound but in reality is not super radical. It still has decent part throttle manners and plenty of mid-range torque. Of course it pulls very hard to 7,000 rpm without laying over. This cam works great with a milder spring than typical solid roller cams require. I was using AFRs standard hydraulic roller springs in my 205s with no problem. Lifters are Morels from AD Performance. Morels are made in the USA and the company actually manufactures lifters for other companies that are then rebranded. More info and specs at the links below.

Prefer emails rather than PMs: [email protected]

COMP Cams 35-772-8 - COMP Cams Xtreme Energy Camshafts - Overview - SummitRacing.com

Morel SBF Solid Roller Lifters - $399.00 : AD Performance, Your Source for Longblock Performance Parts
 
1 - 2 of 2 Posts
Top