Ford Mustang Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
361 Posts
Discussion Starter #1
I just ordered a set of 275/40/17 Mickey Thomson drag radials.
what kind of 60ft 1/4mi and MPH are you getting also at what psi.
 

·
Registered
Joined
·
976 Posts
using a MT 275-40-17 on a 8" rim with pressure between 20-22psi.
best 60" 1.61 avg 60" 1.75 with a 1/4 MPH of 130 at a weight of 3,770
 

·
Registered
Joined
·
1,160 Posts
i'm heading up to the track tomorrow night with my 275-40-17 DR ..i'd also like to know what people are running for air psi and 60'
 

·
Registered
Joined
·
1,160 Posts
i'm heading to NEW ENGLAND DRAGWAY IN NH ..yea i'll post up how they worked out for me .
 

·
Registered
Joined
·
1,160 Posts
Let me know how you make out.

well i went last night ..track was pretty much under water from the storms NH got.... i tryed the tires at 22 psi , 18 , 16 , the best 60' i could get was
2.1 worst 2.3 ...but my cars also got 600lbs 01 bulitt springs up front
so weight transfer even with the swaybar off is limited ...today i'm go'in to install my eibach drag springs 50/50- 90/10 's shocks a struts and head up ina few weeks .
 

·
Registered
Joined
·
613 Posts
I just ordered a set of 275/40/17 Mickey Thomson drag radials.
what kind of 60ft 1/4mi and MPH are you getting also at what psi.
My '03 Cobra 6spd, IRS. 1.57 60ft 10.44 @ 138mph @ 3830lbs. 15psi in the tires.
 

·
Registered
Joined
·
976 Posts
327blwn,

Are you auto or stick?
TKO 600 and I am launching at 3,500 rpm and quickly slipping the clutch out. I have left as high as 4k rpm, but it's hit and miss on track prep. If I leave at less than 3k on a sticky track it just bogs.
 
1 - 11 of 11 Posts
Top