Ford Mustang Forums banner

1 - 14 of 14 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter #1
All new, never ran.
They were installed on some heads to check push rod length, then pulled apart and heads sold.

Lunati 20310525 retro hyd roller
Paid $284, sell $200
.224/.232 @ .050
.284/.290 adv
.535 /.544 lift
112 LSA
108 ICL
2500-6500 rpm range

Matching Comp Cams springs
926-16
Paid $86 -Sale $60


Arp head studs 254-4405
Cost $152, sell $100

Arp rocker studs
Cost $44 sell $30


Comp Cams push rod guides
Paid $20, sell $15






Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
90 Posts
Discussion Starter #2
Head studs and guide plates sold.

Cam, springs, and rocker studs still available.




Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
90 Posts
Discussion Starter #4
I don’t.
They are 3/8, ARP.
The machine shop bought and installed them.
A week later, (without them being ever ran or even rockers mounted)
I removed them and sold the heads.



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
508 Posts
I don’t.
They are 3/8, ARP.
The machine shop bought and installed them.
A week later, (without them being ever ran or even rockers mounted)
I removed them and sold the heads.



Sent from my iPhone using Tapatalk


I’m looking for 7/16. Thanks for the quick reply.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
90 Posts
Discussion Starter #11
$200+shipping for new Lunati cam, matching new Comp Cam springs, and arp screw in studs....
All three were installed on motor, push rod length checked and pulled back apart so I could sell heads and motor.
They are new. Engine Never ran.
This is less than 1/2 price for new parts.....



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
90 Posts
Discussion Starter #12
$175 +shipping.
for cam, matching valvesprings, and arp screw in studs.

Again, never ran, just mocked up.
I just paid over $400 for these three things and never cranked the motor..



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
90 Posts
Discussion Starter #14
If someone wants the matching new Lunati hydraulic lifters, I’ll sell them with cam, springs, and studs for $500

One lifter was taken out of package, with lube, and and push rod measurement taken and put back in package.

That’s over $850 in new parts.
I’ll just upgrade to the pro morels..






Sent from my iPhone using Tapatalk
 
1 - 14 of 14 Posts
Top