Ford Mustang Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
228 Posts
Discussion Starter #1 (Edited)
Hey All,

I've done a 5 lug / 4 wheel disc conversion. So on a Fox we have 94/95 hubs / spindles. I notice this thing has a TON of toe in right now. So I'll eyeball it up to look straight, and then take it over to the shop to have it aligned.

This car is going to do a few autox events this year but is otherwise a weekend toy.

Any advice on how I should have them setup the front? I'm pretty green to alignments, so please dumb it down a bit :)

Also to note, the rest of the suspension is STOCK. So no castor / camber plates or anything like that.
 

·
Registered
Joined
·
3,013 Posts
#1 I dont think you'll be able to align without CC plates.

You should look into a bumpsteer kit. For a Fox the 96+ spindles are a wee bit better (less stack height), but since you already have the 95's stay with those.
(Notice photo #15 versus #28)

Here are some photos of my install:
http://www.dariusrudis.com/2001_Griggs/
 
1 - 6 of 6 Posts
Top