Ford Mustang Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter #1
I have a 95 F150 with a 302/4r70w originally. The truck didn't come with a transmission at all, so I've found a 99-02 V6 mustang 4R70W. How hard is it going to be to swap in the newer trans as far as wiring or electronics while using the truck's EEC/ECM.

I've seen that I would likely have to re-pin the connector from the truck, but I've yet to see a direct how-to or what's-needed to make this newer trans work beyond the repinning of the connector. Trying to weigh everything out before buying the newer v6 4r70.
 
1 - 1 of 1 Posts
Top