Ford Mustang Forums banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
822 Posts
Discussion Starter #1 (Edited)
I'm building a forged Teksid b head 4 valve for my 96gt with plans to turbo it. It will be a street car. I will be runing a single turbo and 10-15psi want to know if this is a good choice number wise?

Cold Side:
#
#Compressor Wheel 76mm
.80 a/r
4” Inlet and 2.5” Compressor Outlet
Inducer-## 76.71mm
Exducer-## 102.36mm
#
#
Exhaust Side:
#
Exhaust Housing T-4 Flanged Divided
Available in 2 A/R sizes -# .68 or .81
3.0" Vband outlet
Inducer- ##74.5mm
Exducer-# 60.56mm
 

·
Premium Member
Joined
·
822 Posts
Discussion Starter #2

·
Registered
Joined
·
2,012 Posts
Get .81 housing, .68 too small for the power you looking for.
 

·
Registered
Joined
·
272 Posts
That looks like the 76mm from On3. I bought one and it seems fine so far. I have the .81 exhaust and it spools very quick on my 347. I have only taken the car out a few times since I got it running, but it seems to do the job. Hopefully it lasts.
 
1 - 4 of 4 Posts
Top