Owned the car since new. Does not get driven much at all. Probably 1000 miles in the past three years. I have determined the fuel pump has failed. Car is very lightly modified with long tubes, off-road X, 4.10s and a VMP tune from 15 years ago. Is it ok to use the Walbro TU229HP 255lph pump instead of the, way more expensive Motorcraft stock replacement?
Fuel pump for a lightly modified 2001 Bullitt
1 - 8 of 8 Posts
Joined
·
616 Posts
The first thing to figure out is if that pump is designed for a return less system.
If I were you I'd make sure that whatever you go with is a drop in replacement.
If I were you I'd make sure that whatever you go with is a drop in replacement.
Joined
·
7,019 Posts
this is the one i got... works great.
Quantum 265LPH Intank Fuel Pump Ford Mustang Bullitt 4.6L 2001, Replaces Ford
Quantum # QFS-344FT-1032 - Quantum 265LPH Intank Fuel Pump Ford Mustang Bullitt 4.6L 2001 - <head> <meta http-equiv=""Content-Language"" content=""en-us""> <meta http-equiv=""Content-Type"" content=""text/html; charset=utf-8;"> <title>New Page 1</title> </head> <html> <body> <p...
www.highflowfuel.com
1 - 8 of 8 Posts
Join the discussion
Recommended Reading
-
Motor swap
GT & SOHCCan i put a 95 Ford endeavor 7.5 460 fuel injected motor in a 96 Mustang gt 4.6- 2
- 304
-
Aprilnicole · updated
-
2004 gt 4.6 up grades
GT & SOHCI just purchased this past sept 2019 a 04 gt convert with auto trans : ( was the only ask from my wife, . he had added quite a bit for my knowledge anyhow. In the past 14 yrs he has added : accufab 70mm throttlebody and plenom, then C & L trueflow inlet pipe and filter system. A few yrs later...- 21
- 864
-
badboiz04gt · updated
-
Engine Builders
GT & SOHCSo I’m looking at ordering a built shortblock if I can’t find a shop to use/I like once I move to San Antonio this month. What online builders have you used that you’re happy with? I’m going to absolutely avoid MMR as there are just too many negative reviews on them. I’ve been looking at...- 2
- 208
-
are these hp292 cam specs
GT & SOHCI found these only, they are regrinds like the hp292s cams. The specs look close does anyone have any input on these? Price is pretty good for a new regrind.- 3
- 804
-
97 MUSTANG GT ENGINE SWAP FROM 2011 CROWN VIC PI QUESTIONS
GT & SOHCI recently decided to swap the engines due to a thrown rod. I am swapping with the 2011 crown vic PI but ran into an issue... The fuel rail on the crown vic has 1 connector and the mustang has 2.. is there any way around this so I could use the flex fuel from the crown vic? The injectors are...- 8
- 269
-
War165 · updated
Join now to ask and comment!