Ford Mustang Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
359 Posts
Discussion Starter #1 (Edited)
I am no longer looking to trade on this unless its for a termi setup i would consider partial trade

I have a 85 mustang GT car is completly rust free you will not find one this solid, however it is origional paint but the car has always been kept indoors its been a drag car for and has been 8.60's from the previous owner with this suspension it cut 1.20 60' times the doors open and close probley better then your car

right now the car is a roller, i am getting ready to set it up next week if it doesnt sell this week

as it sits it is like this

-jaz racing seats
-complete fuel system
-line lock
-10 pt midwest chassies cage
-subframe connectors
-mini tubbed
-auto meter gauges (alot of them)
-6 inch cowl
-nitrious control box (mounted to cealing)

as it is $1800 firm

stuff that will be added when i do the motor

-qa1 tubular k member
-93 351 block
-possibly trick flow twisted wedge heads (have 4k invested)
-victor jr intake
-qa1 a-arms
-35 spline moser axels
-willwood rear disk breaks
-5 lug swap
-8.8 rear end narrowed 1 inch
-9 inch ends
-4:68 gear
-c4 trans
-3500 stall converter
-1.7 roller rockers
-competition enginering adjustable coil overs
-upr double adjustable upper control arms
-upr double adjustable lower control arms
-90/10 lake wood struts
-coil over conversion for front end

if i put the motor, suspension, price would be

7,000 with trick flow heads
5500 with stock 351w heads

i personaly think this is a very good deal on this car considering the work that is done...
if i kept the rear end setup i would knock off 1600. if i kept the front end suspension id knock off 550

i wont sell anyparts without selling the car first so please dont ask.

i am located in davenport ia 52802

[email protected]
563 349 6465

i can text or email you pictures just no way to know how to post them on here
 

Attachments

·
Registered
Joined
·
359 Posts
Discussion Starter #3
heres some crappy pictures i took of it, it looks like a 4wd due to not having any motor and setting on blocks on the rear end, but ive gotten multiple pms about more pictures. here you go also this hood on it right now does not go with it, however the 6 inch cowl from first picture does.





 

·
Registered
Joined
·
359 Posts
Discussion Starter #4

jaz race seats

gauges

gauges

pass tub inside

if this thing isnt sold by saturday im going to start throwing the other parts on it and take it to mustang week to sell
 

·
Registered
Joined
·
359 Posts
Discussion Starter #5

drivers strut tower

pass strut tower

engine bay

fuel pressure gauge

d/s door panel

controler box

gauges

gauges

pass tub inside

drivers tub inside
 
1 - 6 of 6 Posts
Top