Ford Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
323 Posts
Discussion Starter #1
I have Edelbrock 6037's and went to put a new set on a buddies car and the same sparkplugs that mine take will not fit his. they change the casting or ???
What plugs for 5.0 with SN-93 BLOWER??
Thanks Brent
 

·
Registered
Joined
·
200 Posts
Unless they changed something - autolite 3924's or
equivilant. The edelbrock instructions come with a
recommended champion plug; cross ref it to the
type of plug you like to use (motorcraft, etc).

I couldn't find anything that would cross with the
champions when I did my 6037's except A/C rapidfire
#4s. These turned out to be decent plugs, but pricy.
 

·
Premium Member
2006 Satin Silver Mustang GT
Joined
·
1,786 Posts
You will want to run autolite 3923's gapped at .035.
Do you have the 6037's and did the plugs fully seat into the head? Mine have about 2 or 3 threads left until they seat...but, it feels like they are seated and don't want to screw in much more.
Thanks,
Steve
 
1 - 5 of 5 Posts
Top