Ford Mustang Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Within the last month I took my 2012 GT to the drag strip and to the dyno for a baseline.

Car is a six speed with 3.31 gears. Has a cold air intake, Flowmaster exhaust, and some kind of tune from the previous owner.

I wanted to see what it was making before I started my own mods on it. I was hoping for 400 and got max of 402hp and 384 torque! Looks like it's running a bit lean so I ordered an SCT X4 tuner. The dyno guy did say that he couldn't get the sniffer all the way in because of the baffles in the Flowmaster.. so probably that AFR number isn't 100% accurate. I will do some logging with the tuner when i get it.

I also took this car to the drag strip a month ago and got a best of 12.6 @ 114mph. I know I could have gotten deeper into the 12's if I could launch it better!! ;)

Here is video of dyno run. Car sounds nice :D


Love this car!!
 

·
Moderator
Joined
·
11,040 Posts
400 rwhp with a perfect idle and manners from the factory. I'm betting the torque curve is big, fat, and wide too.

 
1 - 4 of 4 Posts
Top