Ford Mustang Forums banner

1 - 12 of 12 Posts

·
authorized corral.net advertisers
Joined
·
17,063 Posts
Discussion Starter #1
MMR has had a overwhelming # of calls from engine builders and customers across the country with broken/failed lower crankshaft sprockets. It seems the majority have been those with upgraded camshafts but many have also been stock applications. We even received a call from a MMR dealers who had even broke 2 on the same engine. When this part breaks catastrophic failure is certain (bent valves, damaged pistons,cylinder heads etc). MMR went to work quickly on a solution and are now selling the MMR Billet Steel gear. This gear replaces the factory powdered metal gear directly with no other changes, the MMR gears are manufactured from billet 9310 heat treated material and precision made in the US by MMR. If you are building aftermarket engine, rebuilding a engine you need one of these!!! Retail on the Billet steel gears is $299. Order here: Products » 1996-2011 DOHC / COBRA/ GT500 Mustang Parts » MMR » PN#422440 Billet Lower crankshaft gear for all 2007-2014 GT500

Dont let this happen to you:



The new MMR Billet gear

 

·
authorized corral.net advertisers
Joined
·
17,063 Posts
Discussion Starter #5
The stock 2V gear is powdered metal also, we have a billet 2V version also on the MMR website - cheap insurance!!
 

·
Registered
Joined
·
161 Posts
Your selling a small gear for three hundred dollars....


This gear right here cost over one hundred and forty dollars less than your gear.





Just pointing out the obvious. I'll go away now.
 

·
Registered
Joined
·
22,793 Posts
machine work goes by the HOUR!

stop being CHEAP

go to home depot and find chinee one

sure it'll be cheaper
 

·
Registered
Joined
·
119 Posts
MMR has had a overwhelming # of calls from engine builders and customers across the country with broken/failed lower crankshaft sprockets. It seems the majority have been those with upgraded camshafts but many have also been stock applications. We even received a call from a MMR dealers who had even broke 2 on the same engine. When this part breaks catastrophic failure is certain (bent valves, damaged pistons,cylinder heads etc). MMR went to work quickly on a solution and are now selling the MMR Billet Steel gear. This gear replaces the factory powdered metal gear directly with no other changes, the MMR gears are manufactured from billet 9310 heat treated material and precision made in the US by MMR. If you are building aftermarket engine, rebuilding a engine you need one of these!!! Retail on the Billet steel gears is $299. Order here: Products » 1996-2011 DOHC / COBRA/ GT500 Mustang Parts » MMR » PN#422440 Billet Lower crankshaft gear for all 2007-2014 GT500

Dont let this happen to you:



The new MMR Billet gear


I think $299 for this is a total rip off. I would rather waste my money on something else.
 
1 - 12 of 12 Posts
Top