Ford Mustang Forums banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Administrator
Joined
·
953 Posts
Discussion Starter #1
Important Dates

Now through December 24th: Submission Entries. Please post your entries, pictures and nominations in this thread. (Submissions after 11:59PM on the 24th will not be included in the competition)

December 26th through end of the month: A poll will be added containing the entered submissions. A voting poll will be created so that all members get the chance to vote on their favorite. The person with the most votes at the end of the month will be the winner for the month of December!


Submissions must include:
  1. 3 photos; no more, no less. NO collages.
  2. Modifications list if you prefer

    *Pictures must be of current state of car...only exception is winter tires. Parts currently for sale or waiting to be installed may not be included. If your wheels/retros/suspension/etc. are currently for sale, even if still on car, they cannot be listed in the mod list. Cars that are currently for sale may not be submitted. No "Future Modifications" either*

ROTM winner will receive:

Ride of the Month winners will be featured in the homepage for the month and
automatically entered into our Quaker State Free Oil Change draw! Each
month, we will randomly select winners, from the other ROTM winners, and each
month we will announce who has won a free oil change from AutoGuide.

To be eligible, all you have to do is participate in the ROTM program,
be selected the winner by your peers, and we will then toss your name in
a hat. The second Monday of each month, from now until November, if your
name is pulled out of the hat, your oil is changed on us! Winners of
this Oil Change Draw receive a gift card to change their oil at a
national service center that uses Quaker State oil for all of their oil
changes.


If you win ROTM, you must wait at least 1 year before being eligible to run again.

Remember, please post your entries, pictures and nominations in this thread.

Let's see your beautiful rides!
 

·
Registered
Joined
·
640 Posts
I'll start.





1993 Reef Blue Coupe

Stock Motor
Vortech V2 S-Trim
3.73
10th Anniversary Reps 18x9 18x10
321/360 to the wheels

Thanks for looking
 

·
Registered
Joined
·
336 Posts




Engine:
Boss block (366ci, 10.25:1 comp)
Diamond pistons
Scat super lightweight crank
Scat rods
Twisted Wedge heads (light bowl port & decking)
Comp NX282HR cam w/Trick Flow 1.7 rockers
Edelbrock Performer RPM II intake
Edelbrock 70mm TB
SCT BA2400 90mm MAF
Vortech V-2 Si-Trim (15psi)
UPR boost pipe
Alky Controls meth kit

Exhaust
MAC longtubes
Dr. Gas O/R X
Bassani aft-cat

Suspension/Chassis
Tokico Drag struts
Strange 10-way shocks
FRPP B springs
PA Racing K-member
Steeda aluminum lower ca's

Brakes
'94-'95 spindles and Cobra front brakes
North Race car brackets and SN95 GT brakes

Wheels/Tires
18x9/10 deep dish Cobra R's
265/35/18 Nitto 555's up front
315/30/18 Hoosier DR's out back

Built and custom tuned by Alternative Auto Performance, Chesterfield Twp., MI, 692rwhp/658rwtq on a 110 octane tune from Lidio
 

·
Registered
Joined
·
1,083 Posts
Its a 92 LX, Twilight metallic blue, 100% stock interior except for a shift light thats about 95% mint.

Last mods left to do are to have a rear built and run slicks. Then after the car is sorted out NA I'm putting a blower on it. Should go low 11's NA with traction.

Put a little over 10,000 miles on it the last 2 years. Hope you like it.





 

·
Registered
Joined
·
22 Posts
Here's my 2004 Black Mach1 with 35,000 miles.
Borla Stinger Catbacks
AFS Black Chrome Mach1 wheels 17X9 17X10.5 wrapped around on Nitto 555s
Visus Rear Louvers
Quarter window louvers
C&L CAI
Rare front pony emblem by artist Lawrence Braun


 

·
Registered
Joined
·
476 Posts
88 gt

[/IMG]
[/IMG]
[/IMG]

-ENG: 306 forged w/ ROSS pistons, Eagle crank fully balanced
-POWER ADDER: Vortech V-1 S-trim polished (8-10psi) AFM power pipe, 8 rib pulleys
-CAM: Trickflow stg.1 499"intake/510"exhust lift
-VALVETRAIN: Trickflow 1.6 ratio rockers and pushrods
-HEADS: Trickflow twisted wedge (o-ring grooved)
-INTAKE: Holley system max w/spacer
-T/BODY: 70mm w/ 70mm egr spacer
-EXHAUST: BBK headers & H-pipe, Flowmaster catback
-FUEL SYST: 42 lb injectors, 255lph fuel pump, Kirban adj reg.
-MASS AIR: C&L 42 lb cal tube
-DRIVETRAIN: FRPP trans ,alum ds, Kevlar/Ceramic clutch, 3:73 gears,PRO 50 shifter
-IGNITION: MSD 6al, coil, FRPP wires
-COOLING: 3 core radiator , adj flexlite fan
-TUNING: Brenspeed SCT tuned chip
-RESULTS= 500 RWHP & 480 RWTQ
SUSPENSION AND BRAKES
FRONT END
Stock k-member
-Ford replacement upper and lower control arms
-LMM drag springs
-KYB adjustable struts
-Stock brakes with slotted and drilled rotors
-Manual rack and pinion
REAR END
-Subframe conn.
-LMM springs w/air lift bag
-Strange 10 way shocks
-GMS adj. lower control arms
-Stock brakes (drum)
INTERIOR
-Custom covered seats
-New carpet & headliner
-White face guages
-Grant steering wheel
-Autometer Phantom 2 boost & Fuel press in custom radio gauge plate
-Billet accessories throughout
EXTERIOR
-New(L5)azure blue paint w/hood flames, same color as 03-04 Mach 1(fact.color was white)
-17x9" black cobra r wheels w/ 275/40/17 Nitto drag radials in the rear.
-17x8" black cobra r wheels w/ 245/45/17 Kelly chargers in the front.
-Cobra R hood
-Cobra rear bumper
-Smoked headlight/fog lights 6000k hids
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top