They remove the seat, carpet, etc to install the cage right? They reinstall it right? lol You should be fine. Like they said above, it may take the right angle and maneuvering but you will be fine. Good luck at the track!
Car is a full weight 92 gt no weight removed. Mods are Vortech V3 SI 10 psi, ported cobra intake, edelbrock performer heads, comp cams, tko 600, 3.73s, full length sub frame connectors, maximum motorsports xd lower control arms, 275/40/18 nitto nt05 street tires. Here is a timeslip the DA was...
Converting a former track car into a drag car. looking for some info on what a good spring rate would be. The car currently has a MM torque arm & rear coilovers with a super stiff spring. Race weight is around 3000lbs.
Hi guys, i made a few changes to my car this winter. Im mainly wondering if the spool i swapped to is going to help my 60ft times. Best 60 i had before was a 1.71(on a stock rear with solid bushings and 3.73s)
Swapped to a spool(same 3.73 gear)
Ford big ends
35 spline axles
Team z full brace...
Just bought my 1982 gt. I was given time slips showing 10.90’s in the quarter. But I am going to race and hit cruise nights. Problem is it has headers to flow master 40‘s that dump before rear axle. So cop attracting loud. Don’t want to choke it so was going to go with flow master 3 inch tail...
A forum community dedicated to Ford Mustang owners and enthusiasts. Come join the discussion about performance, production numbers, VIN decoders, modifications, troubleshooting, power adders, DIY tutorials, and more!