Ford Mustang Forums banner

1 - 2 of 2 Posts

1,799 Posts
Discussion Starter #1
I know the rack in the 5.0 and the 4 cylinder are different, but can I use a bumpsteer kit for a fox 5.0 car on the 4 cylinder rack?

I am doing a 5 lug conversion with 94-95 spindles, and the FMS M-3075-A control arms with spacers for the balljoints. I have read that the tie-rods will not be long enough on the 4 cylinder rack, and that the way to correct this is with a bump steer kit. Please let me know what you have found if you have encountered this before.

Would maximum motorsports part number MMTR-7 work?

Do the 4 cylinder rack, and 8 cylinder racks use the same bumpsteer kits?
1 - 2 of 2 Posts