Ford Mustang Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I'm rebuilding and 84 foxbody I've converted to sn95 brakes. With a 95 master and booster. The issue I'm having is the brake lights come on when you press the pedal but when you press more than halfway down they shut off. Any ideas it's a new switch also
 

·
Registered
Joined
·
23,216 Posts
the switch is normally closed

therefore without the pedal in the fully up position, the lights will come on

once you step on the pedal the switch closes, it cannot open unless there is an issue with the switch

i would remove the switch and test it
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
The lights work normally. Off when not pressing the pedal and on when you are. The problem is they go off after you press the pedal down more than halfway.
 

·
Registered
Joined
·
23,216 Posts
did you not read my post
 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
I did I test the switch and it functions as should. I went and bough a 94/95 switch. Which is slightly different than the fox one. And now they work fine
 

·
Registered
Joined
·
23,216 Posts
You were using wrong parts?
 
1 - 6 of 6 Posts
Top