Ford Mustang Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Im currently installing my ON3 system does anyone have pics of how they ran there vacuum lines to the bov and wastegate.
 

·
Registered
Joined
·
268 Posts
Bov should be direct to a vacuum after throttle body. Wastegate without controller should be the bottom nipple to either compressor wheel on Turbo or intake after throttle body
 

·
Registered
Joined
·
268 Posts
U
 

·
Registered
Joined
·
579 Posts
Bov after throttle blade. WG before throttle blade.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #5
Thanks guys I don't have a boost controller so do I just cap off the top vent on waste gate?
 

·
Registered
Joined
·
3,716 Posts
Just leave it open and the wastegate shouldn't ever see vaccum. The line should be connected directly to the turbo compressor housing
 

·
Registered
Joined
·
1,344 Posts
My vacuum lines have always been from the intake.
 
1 - 7 of 7 Posts
Top