Ford Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #1
What's a good camshaft for autox?

My setup will most likely be stock bottom end 302 with the usual explorer top end. I know it's a pretty vague post but I'm prepared for any answer/replies.
 

·
Registered
Joined
·
280 Posts
so many choices honestly not even trying to be a dick just do a search.Peoples suggestions will range from a b cam to a custom cam or in between like a tfs1 or comp cam. Just depends on your budget
 

·
Registered
Joined
·
29 Posts
Discussion Starter #3
Did a quick search on here before creating this thread and came up with two threads. Just did a Google search and it looks like I'll be saving some money and calling Ed Curtis
 

·
Registered
Joined
·
788 Posts
I've got an Ed Curtis cam in my car. Very good torque and excellent power band. The car made 360 rwhp and 366 rwtq with a 331 cid and AFR 185s. I get around 300 rwtq at 2200 rpm, and carry at least 300 all the way to 6500 rpm
 
1 - 5 of 5 Posts
Top