Ford Mustang Forums banner

41 - 60 of 183 Posts

·
Registered
Joined
·
1,115 Posts
Discussion Starter #41
So the hole for the air box wasn't as big as the hole in the box you can see in the pic I used a black marker to mark the area I needed to cut. So I cut it out. I think this should give 20% more air flow. Thought about cutting the box by the headlight but I don't think its needed.

Also No Pain No Gain.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #43
Looking good man, I'd like to know more about the amp and head unit set up you have. Bluetooth with OE head unit would be great.

What speakers did you go with?
On the speakers I just went to crutchfield and just put in my car and got the cheaper Memphises I could get. The are all 2 ways. If you want part # just let me know. But the will give you a few options.


https://www.crutchfield.com/S-sU1C1QX8Gpv/m_399/Car-Speakers.html

The head unit I haven't installed yet but I have installed one in my MG.

My plan is simple I'm just going to wire it up to the wires that go to the head unit. But the power and the remote wire I will also connect to the OE that will make it come on and show me the time but thats it. Thats all I want from the OE is the time and to look stock. The new head unit I will hide back in the dash it is very small. One thing to add is the 93 cobra came with a amp already installed under the passenger seat. I'm going to leave all that I'm just going to connect the speaker wires that go into the head unit to the new head unit.

https://www.ebay.com/i/162120959651?chn=ps

Keep in mind only this one has bluetooth.

ST4.1000DB | Soundstream

When I connect it I will post some pics but like above. Connect the new one/hide. Connect power and remote wire on the OE(this is also connected to the new one) and install in OE spot.
 

·
Registered
Joined
·
1,115 Posts
Discussion Starter #44
Getting ready for new Carpet and radio install very happy to find the car still has the original plug for the radio on it.

Last pic is all my nitrous wiring (Going to be moving all this to the ash try)
remote bottle opener
Nitrous On/off
Bottle heater

and a 2 step on motor switch
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #45
Got the carpet out inching closer. It has no holes cut in it thats just not cool lol.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #46
So I/ my wife owns a embroidery company. So I ordered a few black nitrous blankets. The plan was to do Ford emblem on each side but decided to do a cobra on top it will be the silver color but going with the red cobra lettering. See Pics
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #47
So I have had my computer (Megasquirt) setting in the passenger-side floor and wanted to put it in the computer spot.

First off the computer holder has to come out. So I used the bottom part to hold the computer in place see pic I cut to make it like I wanted it.

My plan is to put some insulation on both sides of the computer to make it even more stable.

The vacuum is on bottom you can see in pic how I cut for it to work.

The top has both the big plug and the little plug that connects to the laptop. Thats why that part had to go.
I ran the 2 wires over the top of my AC/Dash lines so that it wouldn't be in any bind and should keep it from coming loose.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #48
So both actuators were broke so I changed the easy fix.

Had a security system on the car but never worked so took it out. Will be going with a new one once car is back up and running.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #49
Cleaned up a few pieces and added a few stickers.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #51
So I/ my wife owns a embroidery company. So I ordered a few black nitrous blankets. The plan was to do Ford emblem on each side but decided to do a cobra on top it will be the silver color but going with the red cobra lettering. See Pics
Final got this project done.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #52
Got my rear seats redone. Just don't have much time for the next few months working on wiring the radio right now. Motor want be in till May so I have a little time.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #53
Worked on installing the radio.

First my plan was to use the aftermarket plugs that were on the aftermarket radio that was in it to make a clean transformation. The plan also was to use the stock amp and all wires also.

It didn't work can't tell you why but it wouldn't run from my bluetooth radio and the stock amp. So I pulled the Stock amp out and rewired speaker wires.

First try. Top wire is power, remote and ground. Bottom is speaker wire connector.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #54
Being it didn't work I pull amp out and all wiring. Speaker wire has a connector under the dash (see pic). I unplugged it and rewired.

Have pic of the new wire connector I made for speakers. Just looked at the wire colors at the speaker to match them up.

Also have a pic of how I wired the radio into the stock to make them both have power. (keep in mind the stock is just for clock and looks)
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #55
This is where I placed the bluetooth antenna.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #56
It may seem small but I got the door panels back on.

Also just a pic of all the wiring its not as bad as it looks thats my next project. To wire the NX switch up.
 

Attachments

·
Registered
Joined
·
1,115 Posts
Discussion Starter #58
Are you going to address those saggy map pockets? It's wicked easy to tighten them up
Back in the day I used a softy clip, What is your way???? But yes its on the list.
 

·
Registered
Joined
·
1,115 Posts
Discussion Starter #60
41 - 60 of 183 Posts
Top