Ford Mustang Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
461 Posts
Discussion Starter #1
The quickest it's been was 8.41 at 87mph with a 2.03 60' at 3350 pds with me in it.
This is an 03 v6 (320/330) running nitto 555rs in the rear and stock stall
Is this mph good for low 12's if I can my 60' down to 1.9?
I'm getting ready to put a blower cam on it with some heads looking for 400rwhp. I was told to spec a convetrer at 400rpm below peak tq so I want to wait for the new dyno #'s
 

·
Registered
Joined
·
95 Posts
Well i race at Eddyville 1/8 and run 8.00 @83mph with 1.69 60ft and just went to cordova 1/4 and ran 12.50 @ 105mph.
Car is 71 mustang and is around 3200 pnds. Dont know if that helps or not.
 

·
Registered
Joined
·
461 Posts
Discussion Starter #5 (Edited)
Here is a video from a few weeks ago. 2.2x 60'. I now back into the pit and heat the nittos at the very edge and I also started doing a second gear burnout and it helped. For the 8.41 run it was a 2.03 60' and 100pds lighter.
This car isnt gonna 60 worth a damn until I put in a new stall though.

http://www.youtube.com/watch?v=rXxBglWw0UI
 

·
Registered
Joined
·
2,069 Posts
Wow! That little v6 makes my ride and numbers look like a turd. I ran a best of :(

60' 1.85
1/8 7.89 @ 91.67
1/4 12.08 @ 118

My car is 3160 without me in it.
 

·
Registered
Joined
·
1,457 Posts
damn...Ive always ran 1/8....I thought my old h/c/i car running 7.70s @ 93mph was mid 12s....wonder what it would have really done???
 
1 - 10 of 10 Posts
Top