Ford Mustang Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
750 Posts
Discussion Starter #1
Located in Southeast Iowa

- 4.6 Romeo Cast short block standard bore
- Romeo steel 6 bolt crank
- Boss Roadrunner Forged Rods
- Mahle -16 dish forged pistons
- Romeo PI Heads
- CMS stg 2.5 Cams and springs
- Eddy Intake
- Eddy Rails / -8 feed -6 return
- Magnafuel Boost reference regulator
- Siemens Deka 80lb injectors
- 6061 Plenum
- Trickflow 75mm throttle body
- MSD Coil Pack
- Ford Racing Plug Wires

This will come with the alternator too

Engine has made 600whp. Runs great, no smoke or blow by whatsoever. Still in the car and running.

Price is $2500 for everything included Pick up only / Im also selling the turbo kit which can be included for a package deal - https://forums.corral.net/forums/power-adders/2495742-4-6-2v-turbo-kit.html








 

·
Registered
Joined
·
750 Posts
Discussion Starter #2
Bump

Most recent video of the engine running this past weekend. Putting the car away for winter, AFRS are a little rich due to flushing the fuel system from e85 to pump gas for storage.



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
750 Posts
Discussion Starter #3
Price drop $2200


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
750 Posts
Discussion Starter #6
What do you think this makes naturally aspirated? Wish you were closer! Thanks
I really dont know, a stock healthy bolton 2v makes what around 250-260rwhp? Id say with the bump in compression and cams it may be close to 300. NA .... The cams currently in it are blower cams though.
 
1 - 7 of 7 Posts
Top