Ford Mustang Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
86 Posts
Discussion Starter #1
Have 2 Solid Roller Cam's I'd like to get rid of. I will never use them as I recently got a new custom Cam from Tony Bischoff @BES Racing.

Crane Cams solid roller would have to look up the numbers to get the details or find the cam card but it was around .750 lift in a 434ci with TEA Highport 250's. Ran a few passes on motor it went 9.5-9.60's and 8.40's on a 300shot plate kit with a C4. Have the matching springs from the TEA Highports had under 20 passes on the spring's since new $200 for the cam and springs.

Other solid roller cam was in a freind's car with a 408ci with some Brodix track 1's and a F2 Procharger. Ran very well and had very little time on it. No cam card would have to look it up from the numbers. $150
 
1 - 12 of 12 Posts
Top