Ford Mustang Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
151 Posts
Discussion Starter #1
86gt AFR 165's stock cam,with 285rwhp/322rwtrq, 5sp, 3.73, 265/40/17 falken 452's ,3200-3400 with driver, what range of ET should I be able to manage with a 2.1-2.2 60ft ? Usually shift at 5200-5400 rpm. I Was out last week, track was slick, could only manage a 14.3 , 2.3 60ft, 103.25 mph. It was my first time out this yr so i figure i'm a bit rusty.
 

·
Registered
Joined
·
359 Posts
I est weight numbers but a 3200 car with those numbers should be in low 13 to high 12 range with roughly 105 mph with a 1.7-1.8 60 with a decent driver and sticky tire
 

·
Registered
Joined
·
293 Posts
86gt AFR 165's stock cam,with 285rwhp/322rwtrq, 5sp, 3.73, 265/40/17 falken 452's ,3200-3400 with driver, what range of ET should I be able to manage with a 2.1-2.2 60ft ? Usually shift at 5200-5400 rpm. I Was out last week, track was slick, could only manage a 14.3 , 2.3 60ft, 103.25 mph. It was my first time out this yr so i figure i'm a bit rusty.
I figure with the power and weight with a good 2.2 and some good speed shifting you should hit a good 13.6-13.9. I say try shifting a lil over 5,600 rpms those heads move your power up and will not die like the stock e7's
 
1 - 3 of 3 Posts
Top