Ford Mustang Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
115 Posts
Discussion Starter #1
I have a 01 gt Only had the car about a month. I installed a new ac compressor and if I hook direct power to it clutch will cycle but it will not cycle on it’s own. A friend vacuumed it for me and filled it enough so it should cycle. My scan tool says the wot cutoff is on all other functions are ok. When the plug is not connected to compressor I get 13.5v with a voltmeter. When it’s connected I get around .05v.
Where is the wot or what does it get it’s signal from? Any other reasons it will not work
 
1 - 2 of 2 Posts
Top