Ford AOD; Solid, one-piece input shaft that requires a non-lockup converter that is an original Art Carr (Hybrid AOD/C6 input shaft with C6 style splines, Lentech valve body, chrome pan cover, Ford Racing Wide Gear Ratio:
Includes custom Edge torque...
So im looking into converting my t5 to a aod . Gots me a couple questions cause I'm not really to sure about couple things here.
To start I have a 89 lx . Has a 302 with a 90mm maf 60 injectors b303 cam and a vortech charger at 15 psi . Sct tuner . With 3.73 gear . Car made 509 on...
I recently purchased a c4 transmission to swap into my 87 coupe. The car is currently a 302 car with an AOD. This is my first c4 so I dont really know to much about them. I have done some research but everything I have read doesn't tell me anything about the c4 that I have with the bellhousing I...
I bought a nice mustang, cranks but no start, and realized pretty quick someone cleanly cut the ECM out, along with the pigtail. I presume that it was stolen, but maybe the owner needed some fast cash and that was simple enough. regardless, what ECM actually belongs in the car? I went ahead and...
AOD Valve Bodies (Transmission related)
I need to purge a couple Lentech valve bodies.
These are Lentech, not built by Silverfox Performance.
They were traded in for other SPT units.
1) Strip Terminator, Manual shift, w/Transbrake, Reverse Third, non lock converter only, stage 3, MSRP $879...
Brand is reactor. Fitment is for AOD/AODE/4r70W.
Cost $300 plus brand new.
Selling for $125 shipped.
Needs SFI recertification due to age...sticker has come off.
Pictures show the color and design...I don't have current pics of mine, but it looks identical.
Hit my cell for any...
Specimen is a full weight 93 Notch with 302ci and an AOD.
It is more or less your typical budget build with:
Walboro GSS340 fuel pump (255lph)
Shorty Headers / OR H / Magnaflows
10" 3,000 RPM lock-up stall converter
What are the "must do" items for upgrading an AOD?
A friend of mine recently did an Explorer top end with a B cam. As you might imagine, it is pretty dead off the line now so we are going to be putting in a 3k RPM stall and SilverFox VB in the near future.
Down the road, the car will likely...
I have a AOD Street/Strip Valve Body by Performance Automatic for sale. It has about 1,500 miles on it and came from a good transmission. I just installed a valve body from Silverfox that better fits my needs. This valve body is in excellent condition and definitely gives some awesome tire...
B&amp;M Holeshot 2400 RPM Stall Converter for AOD
B&M Holeshot 2400 RPM Non-Lockup Stall Converter for an AOD. P/N 40430. This is for use with stock input shafts, and rid of that annoying lockup feature.
Has about 1500 miles on it. I went with a bigger cam that requires more stall. The...
So on my way home last night, I was doing about 75mph (speedo is off because of 3.73 gears), and my transmission hesitated, and then made this horrible noise that sounds like a jake brake on a tractor trailer. I have a 2800 stall in an AOD. The aod does have a b&mshift kit. But would...
Not sure how many shooters are re-loaders we have here, but I have these gift cards and I would rather have mustang parts than more reloading equipment.
Looking for a lot of things can trade up with cash. Some things I am looking for are:
PNP ECU pref PIMP
Manual rack set up
I've posted this in other forums but didn't get much. 91 lx vert 5.0 auto. The trans was supposedly rebuilt 5 or 6 years ago by a shop in Colorado that has been shuttered for a few years now. It hasn't been installed until recently. It has a transgo HP shift kit installed on the valve body. The...
Lookingbtontrade my rebuilt ( around 3500 miles) aod with bauman shift kit and breakaway converter for a decent t5 with bell and shifter. Still in my street rod so it can be tested.located in harrisburg, pa.17112
***Updated - SOLD***
SOLD - Lentech AOD 'Street Terminator Plus
Here is a link to the actual transmission that I have on Lentech's website Street Terminator PLUS AOD it shows good to 1100 hp plus mine has the strip terminator valve body.
This transmission was used in my street/strip 8 second...
Hp/Tq Pole - 383w Build Questions
I had a home turbo 351w that due to B.S unknown to has decided it was a good idea to throw 2 rods, bend another, spin a bearing or 2 (yet to open it up all the way) and generally Shyte the bed. Luckily I have a beautiful ultra low mile lightning Block in the...
I am looking to build my First AUTO. it will be for a new motor, 383w which may or may not have a little Giggle Gas:cool: (help me decide). Anyways this build should defiantly bust Mid 400's in power and hopefully be a tourqe monster to boot w/4.10's in the rear. check the 5.8 forums here for my...
i just put in a 363 dart block with 88mm turbo shooting for [email protected] and around [email protected] so the tranny has to be built...i already got prices on new builds im just seeing if i can save some dough so i can fund the rest of the project
Awesome buyer to work with! This man is hard working, laid back, and extremely reasonable. He does his research, and is an excellent communicator!
Starting last fall, we worked out a deal for my built AOD trans. We were both a little apprehensive about it at first as he is in OH and I am in...