Vic JR Intake Opinions - Ford Mustang Forums : Mustang Forum
  • 1 Post By boostup89
LinkBack Thread Tools Display Modes
post #1 of 3 Old 03-02-2017, 10:15 AM Thread Starter
Registered User
Trader Feedback: (7)
Join Date: Jan 2004
Location: Long Island, NY
Posts: 261
Vic JR Intake Opinions

Would I lose lots of power on the low end with a Vic Jr Intake and my setup. It's mostly a daily driver for 9 months a year. I'm afraid that the Vic Jr is gonna take power from my 4500rpm and lower. But I also feel like the high compression motor , Turbo and 3.73 rear will compensate for the shorter runners on the VIC JR. All opinions welcome

4.75 Stroker MMR 750 10.5 to 1
Built 4r75w 3600 stall
Snow Methanol kit
On3 FF single kit with a Precision 7876
Ported PI Heads
Stage 2.5 CMS Turbo Cams
Returnless Cobra Fuel Tank Twin 320 Pumps Modified FPDM
60pd Injectors
3.73 Rear end

1999 Mustang GT Convertible
4.75 MMR 750se 10.5:1 CR Notched Pistons
Ported PI Heads CMS Turbo 2Cams Eddy Intake 75mm 60lb inj Twin Cobra Pumps Modified FPDM
LOU02STANG is offline  
Sponsored Links
post #2 of 3 Old 03-09-2017, 07:42 AM
Registered User
Trader Feedback: (21)
Join Date: Sep 2015
Location: Midwestern Illinois
Posts: 1,328
With those cams, and your turbo, when do you expect it to really start to spool up? If the cams / turbo aren't going to make power till higher up anyway, the Vic intake might not hurt you, especially with 10.5 compression. Was a turbo an afterthought?

97stanger97 likes this.
boostup89 is offline  
post #3 of 3 Old 03-09-2017, 12:52 PM
Registered User
97stanger97's Avatar
Trader Feedback: (19)
Join Date: Oct 2006
Location: NJ
Posts: 2,962
^ I agree. Those gears and that size turbo on these motors would have more of an effect on your spool time than going to Vic Jr. at this point

1997 Mustang GT
1997 Mustang GT
10:1, TF heads, Turbo cams, 7675, E85, 4R70W, Holley EFI
97stanger97 is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the Ford Mustang Forums : Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Coil pack problems on vic jr intake mjkj31007 GT & SOHC 3 09-24-2012 10:04 PM
For Sale Edelbrock EFI Vic JR intake & Eddy rails MikeJ0522 Fuel System & Related 1 09-05-2012 10:41 PM
393w intake opinions BryanJ 5.0/5.8 Engine Tech 4 03-30-2012 01:30 PM
For Sale GT 40 351 windsor Lightning intake (like new) mustangparts4u Windsor Engine Parts 8 04-11-2011 11:04 PM
For Sale Edelbrock Vic Jr heads with rockers and Vic Jr intake 410PONY Windsor Engine Parts 0 12-26-2010 04:26 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome