Got to the track last night with the new setup 2v - Ford Mustang Forums : Corral.net Mustang Forum
 
LinkBack Thread Tools Display Modes
post #1 of 20 Old 09-20-2012, 09:42 AM Thread Starter
Registered User
 
Trader Feedback: (8)
Join Date: Aug 2006
Location: Middletown,De
Posts: 1,361
Got to the track last night with the new setup 2v

Despite my converter being way too tight and not being able to build ANY boost off the line I still got some decent times I would say.

The car was flying down the track compared to my previous setup thats for sure just slow off the line.

This was full weight, full interior, subs/ amps in trunk, etc.

Anyways, my best time was 10.7x with something like a 1.8 60 foot and 132 mph trap speed.

I think it has low 10s in it no problem with a looser converter.

justinschmidt1 is offline  
Sponsored Links
Advertisement
 
post #2 of 20 Old 09-20-2012, 10:11 AM
Registered User
 
Baznasty Dave's Avatar
 
Trader Feedback: (1)
Join Date: Dec 2011
Location: NC
Posts: 383
What was the 1/8th stats?


305/333 WHP/WTQ with CMS Stage II Cams
440/552 WHP/WTQ on Nitrous
7.86, @ 89.1mph, 1.61 60 foot, on Motor
7.15, @ 98.8mph, 1.55 60 foot, on Spray
Baznasty Dave is offline  
post #3 of 20 Old 09-20-2012, 10:27 AM Thread Starter
Registered User
 
Trader Feedback: (8)
Join Date: Aug 2006
Location: Middletown,De
Posts: 1,361


Heres the slip.

looks like a [email protected] 105

I wasnt too far behind with my vortech setup haha, think it did a [email protected] mph...this car just hauls ass from the 330 foot on now.

Its a shame the converter isnt right...I might have a shot at a 9 second slip if I could launch in boost and pull 1.5x range 60 foots.
justinschmidt1 is offline  
Sponsored Links
Advertisement
 
post #4 of 20 Old 09-20-2012, 01:59 PM
Registered User
 
Baznasty Dave's Avatar
 
Trader Feedback: (1)
Join Date: Dec 2011
Location: NC
Posts: 383
Turbo cars pull sooooo hard lol nice trap!

305/333 WHP/WTQ with CMS Stage II Cams
440/552 WHP/WTQ on Nitrous
7.86, @ 89.1mph, 1.61 60 foot, on Motor
7.15, @ 98.8mph, 1.55 60 foot, on Spray
Baznasty Dave is offline  
post #5 of 20 Old 09-20-2012, 02:45 PM Thread Starter
Registered User
 
Trader Feedback: (8)
Join Date: Aug 2006
Location: Middletown,De
Posts: 1,361
Quote:
Originally Posted by Baznasty Dave View Post
Turbo cars pull sooooo hard lol nice trap!

Thanks, yea man this thing pulls so damn hard all the way down the track, its insane.

I swear if I could launch in boost I would trap 135, maybe higher
justinschmidt1 is offline  
post #6 of 20 Old 09-20-2012, 04:09 PM
Registered User
 
bwaite's Avatar
 
Trader Feedback: (19)
Join Date: Feb 2009
Location: Gettysburg, Pa
Posts: 1,195
Great times. I hope to be there someday


Sent from my iPhone using AG Free

2004 Mustang Sonic Blue - turbo- - MMR 4.75 900
bwaite is offline  
post #7 of 20 Old 09-20-2012, 05:34 PM
Registered User
 
Buds91LX's Avatar
 
Trader Feedback: (7)
Join Date: Oct 2004
Location: Mentor Ohio thats NE of Cleveland
Posts: 456
what is you combo? mods..

Rio Red 97 cobra. Full turbo build. 78MM
91 Vortech LX. 15#boost. Sold
silver Whippled 03 cobra. Sold
DSG Whippled 03 Cobra Sold
Buds91LX is offline  
post #8 of 20 Old 09-20-2012, 05:34 PM
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
Great times. Any details on the setup? I'd like to make a quarte mile hit one day. Mostly 1/8 th mile around here but I've been 118 in the 8th.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #9 of 20 Old 09-20-2012, 05:36 PM
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
Treed^^^^^

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #10 of 20 Old 09-20-2012, 05:40 PM
Corral Elite Member
 
89BlackGtVert's Avatar
 
Trader Feedback: (6)
Join Date: Jan 2012
Location: PA
Posts: 1,535
Blog Entries: 1
Love to hear your setup.

Sent from my PI86100 using Board Express


1989 GT Vert.. Major Changes for 2013 Wish me luck
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Old setup from 2012 On3 Turbo, Trick Flow 170 Heads, Edelbrock RPM upper & Lower, Trick Flow Stg 2 cam, UPR K-member and control arms and Strang front and rear coil over, and UPR upper and lower rear control arms, MM frame connectors Fully Built AOD, 512whp
89BlackGtVert is offline  
post #11 of 20 Old 09-20-2012, 06:10 PM Thread Starter
Registered User
 
Trader Feedback: (8)
Join Date: Aug 2006
Location: Middletown,De
Posts: 1,361
yep sorry about that.

Its a 96 GT with a 4r70w and a multi disc converter
3.27 rear
forged 4.6 2v
edelbrock victor jr manifold
ported PI heads
stock PI cams
67mm comp turbo on3 kit

The car made 541 rwhp on 15~ psi and 587 rwhp on 18-19 psi

These runs were done on the high boost setting.

I probably could have pushed more boost and timing but figured id leave it at that since it wasnt launching at all anyway.

Last edited by justinschmidt1; 09-20-2012 at 06:16 PM.
justinschmidt1 is offline  
post #12 of 20 Old 09-20-2012, 06:33 PM
Corral Elite Member
 
89BlackGtVert's Avatar
 
Trader Feedback: (6)
Join Date: Jan 2012
Location: PA
Posts: 1,535
Blog Entries: 1
Quote:
Originally Posted by justinschmidt1 View Post
yep sorry about that.

Its a 96 GT with a 4r70w and a multi disc converter
3.27 rear
forged 4.6 2v
edelbrock victor jr manifold
ported PI heads
stock PI cams
67mm comp turbo on3 kit

The car made 541 rwhp on 15~ psi and 587 rwhp on 18-19 psi

These runs were done on the high boost setting.

I probably could have pushed more boost and timing but figured id leave it at that since it wasnt launching at all anyway.
man. I love these 2v's yiu can just throw a bottom end in and and boost and be done. Us 5.0 guys need blocks and grap.. Maybe my fox needs a 4v?

1989 GT Vert.. Major Changes for 2013 Wish me luck
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Old setup from 2012 On3 Turbo, Trick Flow 170 Heads, Edelbrock RPM upper & Lower, Trick Flow Stg 2 cam, UPR K-member and control arms and Strang front and rear coil over, and UPR upper and lower rear control arms, MM frame connectors Fully Built AOD, 512whp
89BlackGtVert is offline  
post #13 of 20 Old 09-20-2012, 07:28 PM Thread Starter
Registered User
 
Trader Feedback: (8)
Join Date: Aug 2006
Location: Middletown,De
Posts: 1,361
Quote:
Originally Posted by 89BlackGtVert View Post
man. I love these 2v's yiu can just throw a bottom end in and and boost and be done. Us 5.0 guys need blocks and grap.. Maybe my fox needs a 4v?
Yep, pretty much all you need is some boost and forged internals and they are solid.

I was worried about my transmission so I didnt push it any farther.
justinschmidt1 is offline  
post #14 of 20 Old 09-22-2012, 12:08 AM
Registered User
 
Trader Feedback: (17)
Join Date: Jan 2007
Location: Louisville, KY
Posts: 2,772
Good runs. Get that convertor straightened out, will definately see some improvements.

2002 GT 4V swapped
2008 G8 GT Stock
CamFox is offline  
post #15 of 20 Old 09-22-2012, 02:31 PM
Registered User
 
Trader Feedback: (25)
Join Date: Mar 2004
Location: spokane WA
Posts: 549
Is that comp turbo one of their triple ball bearing jobs? If so how do u like it?
2slow93gt is offline  
post #16 of 20 Old 09-22-2012, 05:30 PM Thread Starter
Registered User
 
Trader Feedback: (8)
Join Date: Aug 2006
Location: Middletown,De
Posts: 1,361
Quote:
Originally Posted by 2slow93gt View Post
Is that comp turbo one of their triple ball bearing jobs? If so how do u like it?
Its a journal bearing billet wheel 67mm.

With my setup now I can pretty much hit the gas from any speed rolling and have virtually instant boost so no issues with spool time.

Im satisfied with it, seeing the full 15 psi at 3500 rpms on the dyno although I have nothing else to compare it to but ti seems to be doing its job.
justinschmidt1 is offline  
post #17 of 20 Old 09-24-2012, 02:01 PM
Registered User
 
Trader Feedback: (20)
Join Date: Jul 2008
Location: sturgis,MI
Posts: 1,074
what kind of gap are u running on your plugs?

1999 auto turbo buld! Precision PT7675 CEA
MMR 4.75 se stroker bullet oil pump 9:1 compression notched pistions MMR stage 3 turbo cams, livernois stage 3 heads ARP everything cricle D triple disk 3800 stall 6pt cage full adj suspension just a street car
xbox: mcraven420
Lookin for 9's
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
cravens02 is offline  
post #18 of 20 Old 09-24-2012, 07:37 PM Thread Starter
Registered User
 
Trader Feedback: (8)
Join Date: Aug 2006
Location: Middletown,De
Posts: 1,361
Quote:
Originally Posted by cravens02 View Post
what kind of gap are u running on your plugs?
I had issues with TR6s even when I closed to gap way down to .02.

Switched to BR6EF, left the stock gap and it was fine at 20 psi.

I believe the gap on them is really tight, around .02 from the factory from my measurement but the big thing is the non projected tip
justinschmidt1 is offline  
post #19 of 20 Old 09-24-2012, 09:05 PM
Registered User
 
Trader Feedback: (32)
Join Date: Aug 2002
Location: ADEL GA BABY
Posts: 2,287
Any mods to the 4r70w?

bone stock Bright Atlantic Blue 98gt
ruffledfeathers is offline  
post #20 of 20 Old 09-24-2012, 09:08 PM Thread Starter
Registered User
 
Trader Feedback: (8)
Join Date: Aug 2006
Location: Middletown,De
Posts: 1,361
Quote:
Originally Posted by ruffledfeathers View Post
Any mods to the 4r70w?
Yea its built up with upgraded stuff, all the 4r75 parts hardened shaft, custom springs, custom.vb etc etc
justinschmidt1 is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Megabite Jr's Track Results (sort of) AlexLTDLX Drag Racing 28 09-24-2012 10:01 AM
so I think I snapped an axle at track last night ledee416 General Mustang Tech 25 09-10-2012 04:11 PM
NEW: Track Guys at the BRAND NEW Atlanta Motorsports Park, June 30 - July 1 Stanger58 Midwest 0 06-03-2012 02:30 AM
Took my Pro-Cal 2012 to the track last night. MikeLTDLX S-197 Mustang GT (2011-2014) 3 01-12-2012 04:59 PM
For Sale Complete race cog setup w/ many extras for Procharger 4.6 eebj01 Power Adders 7 10-07-2011 08:08 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome