First pass's with new setup - Ford Mustang Forums : Corral.net Mustang Forum
 
LinkBack Thread Tools Display Modes
post #1 of 19 Old 09-12-2011, 09:28 PM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
First pass's with new setup

Ever since the new motor and turbo setup I havnt ran the car at the track. Im not the kind of person that goes everyweekend so im pretty happy with my times.

Quick rundown of the car

95 gt
boss block 306
vic jrs
TFS R intake
MP70 with .68 ar on 17psi
C4 no brake
3.27's with 325/50 MT's

First pass I didnt do a good burnout and spun 1st and second then got back in it and ran a [email protected] with a 2.2 60ft
qwiksn95's Channel - YouTube

Second pass did a better burnout But triped the beams and short shifted into third but it ran a [email protected] with a 2.0 60ft
qwiksn95's Channel - YouTube

Third pass good burnout and add about 45pds to the trunk and didnt trip the beam. I rolled into it and the car didnt spin just went. Car ran a [email protected] with a 1.9 60ft.
qwiksn95's Channel - YouTube

I finally started holding 2nd throught the 8th. Turning about 6800 at the 660mark. I know my 60ft blows but I got the transbrake on the way and hoping for some 6.50's this weekend. Ill post up the results saterday.


95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
Sponsored Links
Advertisement
 
post #2 of 19 Old 09-12-2011, 09:31 PM
Registered User
 
Trader Feedback: (0)
Join Date: Jul 2004
Location: San Diego
Posts: 1,006
Get the 60 down and put a 96 housing on that thing with a brake ! you'll see 6.40's all day long, maybe better.

10secgoal is offline  
post #3 of 19 Old 09-12-2011, 09:45 PM
Registered User
 
Trader Feedback: (17)
Join Date: Mar 2006
Location: nevada
Posts: 444
looks good what size stall are u running
allenpeake is offline  
Sponsored Links
Advertisement
 
post #4 of 19 Old 09-12-2011, 10:05 PM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
Yea I'm looking for a .96 now to slow the hit alittle and I know Its holding me back but I got the Turbo cheap locally. The transbrake will be here Thursday so I'm hoping for good things. I not sure on the converter. I can only footbrake it to like 2500 but its flashing close to 6k. I need a new one.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #5 of 19 Old 09-16-2011, 04:54 PM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
Got the Transbrake installed and wired up my 2 step with the transbrake button. Tested in the driveway and eveything works great. What AFR should I shoot for when on the 2 step. Right now I have it set to 3500 and it makes 6psi of boost. AFR is like 14.0 and the timeing is around 25*. Sound close or yall think I should set the 2 step to pull timing and I belive that would make it rich. I can set it to pull timing starting around 3k rpm and retard to around 10* or wherever.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #6 of 19 Old 09-16-2011, 05:00 PM
Registered User
 
Trader Feedback: (0)
Join Date: Jul 2004
Location: San Diego
Posts: 1,006
Yeah, you're blowing through the converter. At 3400 and no two step mine would hit a wall and see the full 14 psi. I'd leave it and see if you can hook before messing with it.
10secgoal is offline  
post #7 of 19 Old 09-20-2011, 01:25 AM
Registered User
 
Trader Feedback: (5)
Join Date: Jun 2011
Location: Louisville, KY
Posts: 446
your running the same mph as my friend and he ran a 6.29 n the 1/8
Itsblue95 is offline  
post #8 of 19 Old 09-20-2011, 09:56 AM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
That's good to hear. I'd like to go 6.40's on this setup.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #9 of 19 Old 10-11-2011, 03:33 PM
Registered User
 
Trader Feedback: (3)
Join Date: Jul 2004
Location: NC
Posts: 369
Been back to the track yet? Any new times?
ToxicByte is offline  
post #10 of 19 Old 10-11-2011, 05:12 PM
Registered User
 
Trader Feedback: (1)
Join Date: Dec 2009
Location: MI
Posts: 232
Any dyno #s?

Race weight?

01snakez is offline  
post #11 of 19 Old 10-11-2011, 05:53 PM
Formerly eades5.0
 
4Jenna's Avatar
 
Trader Feedback: (24)
Join Date: Jul 2001
Location: AZ
Posts: 4,716
Awesome, def sounded like you were blowing thru the converter! The car has some serious potential!

Any pics, I have been thinking about a 325/50

WWW.JENNABEARSFOUNDATION.ORG
4Jenna is offline  
post #12 of 19 Old 10-11-2011, 07:55 PM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850




These are the only two I have. They fit fine with a litte BFH and rolling the quater's. I ran 2 pass's with the car with the C4 and the trans brake and and got a 6.80 @ 107 with a 1.91 60ft. Left soft and boged on the brake. Next pass left about 4200 on 3-4psi and did a 1.56 60ft and got out of half track cause when I shifted second it just felt like it quit pullin. Im pretty sure I was just blowing through the converter. I checked and had alot of fluid on the car coming from the vent on the c4 so I pulled it and sold that setup. Car is down right now with no trans just sitting on my lift. Ive got a 1.82 glide,full rebuild with kevlar band from PTC, Transbrake valvebody for PTC, Input shaft with turbo splines from BTE,Custom converter from BTE for my car,JW swap bell and flywheel and all the other odds and ends to do the swap just havnt got the bell in yet. It shipped out today but it will be a week or two befor I can work on it. I had surgery on my foot today so im off my feet for a few days. Im thinking the car with the glide and a good converter is going to run way better. Also going to do a ARB while im at it. Ill post more when I get it together.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #13 of 19 Old 10-11-2011, 09:25 PM
Authorized corral.net Advertiser
 
ModularSpeed's Avatar
 
Trader Feedback: (4)
Join Date: Dec 2004
Location: Florida/Michigan
Posts: 1,647
Good stuff! Wicked fast!

2015 S550 GT - 2.3 TVS Powered on 17" Radials
Stock Trans / Stock Converter / 1.28 Sixties
[email protected] Boost --- ([email protected] Boost/Spray)

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
ModularSpeed is offline  
post #14 of 19 Old 10-13-2011, 11:51 AM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
Got the bell in yesterday. Only waiting on the dipstick now. As soon as im back on my feet im going to get the glide in.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #15 of 19 Old 10-13-2011, 07:34 PM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
Got my dipstick in this afternoon. I got one from Holcomb motorsports for a Glide using a JW ultra bell with a SBF. Fits great with the bell. Hoping to get the trans built and ready to install sunday.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #16 of 19 Old 10-23-2011, 12:30 AM
Registered User
 
zion1015's Avatar
 
Trader Feedback: (12)
Join Date: Aug 2010
Location: mississippi
Posts: 451
Well any updates what kinda boost are you running
zion1015 is offline  
post #17 of 19 Old 10-23-2011, 05:18 PM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
Just been busy with a bunch of other stuff lately besides the car. Glides ready to be installed just havnt had time. Ill post up a few more updates when I get it done. Boost is on like 16-17 psi. Im ready to get rid of this thing and do a S380r and go with a better cam. Hopefully after the holidays I can do it and really be making some power.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #18 of 19 Old 10-26-2011, 09:40 PM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850


No big update just finished up the final touchs. Its ready to go now but dont have time this week to install. Hope to get it installed early next week.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
post #19 of 19 Old 11-15-2011, 12:33 AM Thread Starter
Registered User
 
Trader Feedback: (20)
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,850
Motor and trans are in the car. Going to get a trans mount situated tomorrow and get a measurement for a driveshaft. Hoping to have it running this weekend.

95 GT-306, cnc Victor Jr's,R intake, GT4788,Glide,E85,28's
95 cobra-MM suspension, bolt ons, DD
TRmustangTR is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale Complete race cog setup w/ many extras for Procharger 4.6 eebj01 Power Adders 7 10-07-2011 08:08 PM
For Sale Procharger F1-C 4.6 4V w/ cog setup and/or factory 8 rib eebj01 Power Adders 0 07-01-2011 03:52 PM
For Sale ***Mustang Sumped tank, dual A1000 setup with magnaflow fuel filter*** Blown302stng Fuel System & Related 25 05-25-2011 11:57 PM
Want To Trade wtt dynamic pro tree2 powerglide setup for built c4 or aod setup fuzz Drivetrain Parts 0 03-01-2011 06:14 PM
For Sale Complete dual Front Mount A/w Setup with 5 gal Tank and Lines Blown302stng Power Adders 12 12-31-2010 08:35 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome