Which injectors to use?
I have a car I am about to get started on with an on3 kit with the master power 70mm setup. It is a stock bottom end, stock cam, box stock twisted wedges, head studs, systemax II, 75mm throttle body. It will have a 5 speed for now, but most likely some type of auto shortly. I have some new terminator ev6 39#, the ev1 adaptors and on3's pro-m blowthru meter that came with the kit I bought. I also have a new set of seimens deka ev1 60# and matching pro-m blowthru meter as well. The car will be mainly a family fun car and very little track time. Is the 39s enough, or will I need the 60s. I will probably see 8-10lbs of boost max, but may decide to push it sometimes to see if the block will hold more. I have broken blocks before on nitrous, but somewhere around the 800hp mark. I plan on keeping this one at or below the 450-500 rwhp mark.
Also, for street action and with the wife driving it some, what is a good clutch to try. I have a new king cobra that I was gonna try, but don't see it holding for long. The car is a fox coupe with 17x10.5 cobra rs and 315 nitto drag radials.
Thanks in advance, Billy
Last edited by 9389coupe; 09-07-2011 at 04:38 PM.