If I'm running a standalone (Megsquirt/AEM/FAST/etc), then I set my base fuel pressure to 43.5 with the vacuum line disconnected, since this is the fuel pressure that almost all aftermarket injectors are flow rated at. I'll then set my base timing at 10*BTDC and adjust my curve in the software.
Stock Block 408", TFS 11R 205, TFS EFI Carb R Intake, XFI 236HR, Tweecer, Faceplated TKO 500
10.49 @ 130mph
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.