on3 76mm oil drain setup - Ford Mustang Forums : Corral.net Mustang Forum
 
LinkBack Thread Tools Display Modes
post #1 of 4 Old 03-20-2011, 02:20 AM Thread Starter
Registered User
 
Trader Feedback: (17)
Join Date: Mar 2006
Location: nevada
Posts: 444
on3 76mm oil drain setup

trying to figure out my oil drain set up for on3 5.0 foxbody kit i have the on3 76mm turbo with the oil feed level i dont see how the drain can work it real close to the ex housing once the 3/4 drain hose is on there may touch or even be few mms away from it only thing i can think of is clock the center section at the 10 o clock postion but afarid of turbo damage my last turbo was clocked this way on my treadstone ebay kit and never had a turbo problem at 8lbs any ideas would be great

allenpeake is offline  
Sponsored Links
Advertisement
 
post #2 of 4 Old 03-20-2011, 12:15 PM
Registered User
 
Trader Feedback: (6)
Join Date: Feb 2007
Location: chicago
Posts: 300
I have the sn95 kit and I dont have any issue with it being too close. However, I would not clock the turbo. I would leave it straight up and down to prevent any damage to your seals. Can you post up a pic of what you are talking about?


...95 cobra...bolt ons...
mikey james is offline  
post #3 of 4 Old 03-20-2011, 12:20 PM
Registered User
 
Trader Feedback: (22)
Join Date: Jun 2007
Location: Tennessee
Posts: 3,716
turbo must be straight up and down or else you will restrict oil flow

03 Mustang GT
Turbo 2v
LS1KILR is offline  
Sponsored Links
Advertisement
 
post #4 of 4 Old 03-20-2011, 03:40 PM Thread Starter
Registered User
 
Trader Feedback: (17)
Join Date: Mar 2006
Location: nevada
Posts: 444
update so far i got plenty of room to run a 1/2inch setup without any issues
also to go with the 3/4inc setup i used a 2inch brass pipe wich gave me plenty of room from the turbine housing for the house to be safe but will have to notch the frame rail a little bit so the hose wont rub on it
allenpeake is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Why your gas prices are "high", and why we won't do anything about it (stop whining) Stevester Lounge 51 02-23-2011 06:06 PM
Anyone using magnetic oil drain plugs....? Viper Stang 5.0/5.8 Engine Tech 16 01-04-2002 05:28 PM
Serious questions dilemma about mechanical oil PSI gauge and DOHC oil PSI readings Cobra Jet NJ GT & SOHC 11 12-14-2001 04:19 PM
Quick Response Needed!! Why didn't all my oil drain?? spikes95GT 94/95 Tech 9 12-14-2001 04:11 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome