Water Methanol Injection (Coolingmist). Learn about our systems - Ford Mustang Forums : Corral.net Mustang Forum
 
LinkBack Thread Tools Display Modes
post #1 of 27 Old 05-30-2009, 07:38 AM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Water Methanol Injection (Coolingmist). Learn about our systems

For those of you that do not know us, we are coolingmist (www.coolingmist.com). We have been a leading manufacturer of water/meth injection kits since 2004. We would like to have this thread to discuss any application questions or technical questions concerning our products.

Water/Methanol injection is well known to reduce/prevent detonation as well as increase horsepower and even make your vehicle more efficient at the pump. The more modifications you have the more power you will make..but what sets methanol/water injection apart is the safety factor. Your vehicle will actually have a safer tune with the injection system!

We designed our kits to be the most flexible using a modular type system as well as cost effective for the customer. I have a list and details of a few of our kits below.

This is alot of info, ask any questions about our kits or how they can work for you.

all of our CMGS kits are here:

http://www.coolingmist.com/pagedispl...ature_key=cmgs

All of our VC2 kits are here:

http://www.coolingmist.com/pagedispl...eature_key=vc2



Our pumps for these kits are 250 PSI bypass pumps for the ultimate in atomization.

NEW STATE OF THE ART PROGRESSIVE CONTROLLERS

There is nothing quite like it on the market. New for 2009 We have 2 versions CMGS (coolingmist gauge system) and VC-II (Vari-Cool II). These represent the 2nd generation of our Vari-Cool Controller which was originally released in 2005. These are built on an entirely new platform with the latest generatio processors for the most accurate metering. The only difference between these controllers is the enclosure. One is a 52 MM gauge, the other is a 3.5 X 3.5 inch traditional mount controller. Pictures of the controllers are below.

Both the CMGS and VC2 controllers inject progressivly. You can inject based on boost, or voltage or a combination of both. You have the ability to change the curve, set the min/max dutycycle, display boost or voltage or the dutycycle of the pump. you dont need any computer to configure these just adjust through the menu. There is a 2 bar map sensor built in. These function as a boost display gauge if you wish and also have a flow meter option if you wish to see flow.

Vari-Cool II (VC2). Options include RED 3 digit display or Blue 3 digit display. the VC2 is the square controller on the top.


CMGS options include silver or black bezel and red or blue 3 digit display. the CMGS is the gauge controller on the bottom





Our kit options include underhood version or all in one trunkmount options.





varicool II







To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
Sponsored Links
Advertisement
 
post #2 of 27 Old 06-02-2009, 10:21 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
here are some cool vids to show you how the cmgs and vc2 can be configured. possibilities are endless.

http://www.coolingmist.com/videos.aspx



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #3 of 27 Old 06-03-2009, 08:02 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Let us know if you have any questions about our products. YOu can see what he have at www.coolingmist.com. our phone # is 888-667-3479.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
Sponsored Links
Advertisement
 
post #4 of 27 Old 06-06-2009, 11:26 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
visit us at www.coolingmist.com to see our products. Any questions let us know.

888-MORE-HPW


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #5 of 27 Old 06-09-2009, 09:50 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
visit us at www.coolingmist.com or call us today!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #6 of 27 Old 06-16-2009, 08:05 AM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
any questions just pm, reply to the thread, email or call us!! We dont just have some of the best systems for the money, we have some of the best systems!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #7 of 27 Old 06-20-2009, 02:47 PM
Registered User
 
Trader Feedback: (18)
Join Date: Jun 2007
Location: around the way
Posts: 667
that tank looks exactly like the AIS tank. and you HAVE to be KIDDING! bungy cords!!!!! that tells me everything i need to know about your system.
Tony K is offline  
post #8 of 27 Old 06-20-2009, 04:53 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Quote:
Originally Posted by Tony K View Post
that tank looks exactly like the AIS tank. and you HAVE to be KIDDING! bungy cords!!!!! that tells me everything i need to know about your system.
Thank you for kind words. We are the manufacturer of that tank.

David


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #9 of 27 Old 06-21-2009, 02:58 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Thanks for taking the time to read. Visit us at www.coolingmist.com for the newest most complete systems on the market.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #10 of 27 Old 06-24-2009, 05:57 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
www.coolingmist.com for the best in meth injection!



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #11 of 27 Old 06-27-2009, 08:52 AM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
we are open saturday and sundays from 10 am to 4 PM. Call if you need to order or have questions! 888-667-3479


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #12 of 27 Old 06-30-2009, 06:55 AM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
we are running a sale on our CMGS stage 2 kits. If you order the kit you can get the flow sensor for $67, normally $130. this is a great deal.

http://www.coolingmist.com/detailmai...=cmgsunderhood



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #13 of 27 Old 06-30-2009, 03:18 PM
Registered User
 
Trader Feedback: (18)
Join Date: Dec 2008
Location: Florida
Posts: 1,528
I've used your basic Coolingmist kit on my Dodge SRT4. I picked up close to 30 ftlbs of torque because of your kit. The water/meth mixture allowed me to run more boost at a safer air to fuel ratio and keep knock down low enough that the computer could safely run more timing. With the stage 3 turbocharger (little 39lb wheel) it made around 330whp and 350ftlbs.


TonyK, if you've never heard of Coolingmist, you must be new to turbocharging.
justhereforinfo is offline  
post #14 of 27 Old 07-02-2009, 04:46 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
thanks alot, I always appreciate feedback!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #15 of 27 Old 07-05-2009, 02:00 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
bump. See us at www.coolingmist.com or call/PM us!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #16 of 27 Old 07-06-2009, 07:46 AM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
www.coolingmist.com! Call us today!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #17 of 27 Old 07-07-2009, 07:05 AM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Any questions? feel free to call us at 888-MORE-HPW or visit us at www.coolingmist.com or post to this thread!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #18 of 27 Old 07-11-2009, 09:48 AM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Let us know if you guys have any questions. If your looking for a meth injection kit we have some really cool products.

Most of us want a boost gauge, a water/meth injection controller, possibily a flow gauge.....what if we had a unit that is all in one? Our CMGS gauge is a full progressive controller..a boost gauge and is a flow gauge (with our optional flow sensor).

For those of you that dont want to mount a gauge, there is our VC2. The VC (Vari-Cool II) are the square units on top. If you have a current water/meth system with either a boost switch or a competitors controller you can replace with ours. Lets say you have a boost gauge and a progressive controller from another company. You can replace both with this one unit. Lets say you like your boost gauge alot...you can configure ours to display the pump dutycycle so you know exactly what % the motor is running at. You cant lose! Its a very configurable system. Its compatable with every kit sold from any US based manufacturer (if you want to replace your current controller). For those that dont have a kit we sell the kits on our website at www.coolingmist.com.


Here are some pics.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #19 of 27 Old 07-13-2009, 08:24 PM
Registered User
 
mike06tr's Avatar
 
Trader Feedback: (2)
Join Date: Apr 2008
Location: New Orleans LA
Posts: 1,006
Blog Entries: 3
Can I run a Methanol kit in place of an intercooler? Want to be kind of stelth with the project and not have an intercooler hogging up the front of the car.

Cheaper than VHT and works great.
So sticky it will practically pull your shoes off, just like the movie theater
floor..
mike06tr is offline  
post #20 of 27 Old 07-13-2009, 08:34 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Quote:
Originally Posted by mike06tr View Post
Can I run a Methanol kit in place of an intercooler? Want to be kind of stelth with the project and not have an intercooler hogging up the front of the car.
Absolutely. You just want to make sure you keep the tank full,etc. Our CMGS based kits would work fantanstic. Use the stock windshield washer tank with the kit, since the CMGS controller is also a boost gauge..most people will not know its a meth controller.

You can see the CMGS in my sig, its avail in red or blue LED. Thats just an option, we have plenty of other kits.

Let me know how else I can help you.

David


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #21 of 27 Old 07-14-2009, 03:44 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
bump! Visit our website or call us at 888-MORE-HPW.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #22 of 27 Old 07-17-2009, 04:16 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Bump!! feel free to check out our products or call us!

CM


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #23 of 27 Old 07-21-2009, 05:49 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
let us know if you have questions!

CM


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #24 of 27 Old 07-25-2009, 06:13 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
bump! www.coolingmist.com


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #25 of 27 Old 07-28-2009, 05:23 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
visit us online at www.coolingmist.com or call 888-more-hpw for the best in meth injection.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #26 of 27 Old 08-03-2009, 08:57 AM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
Hey everyone, its Monday! Call, PM or Email us with any questions!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
post #27 of 27 Old 08-20-2009, 08:37 PM Thread Starter
Authorized corral.net Advertiser
 
Trader Feedback: (0)
Join Date: Dec 2005
Location: Atlanta
Posts: 105
check us out at www.coolingmist.com


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


TOLL FREE 888-MORE-HPW or 888-667-3479
coolingmist is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Tags
methanol injection, water injection

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
coolingmist questions and answers (Water/Methanol Injection) coolingmist Superchargers 35 08-23-2009 08:38 PM
new Coolingmist water/methanol injection systems! coolingmist Power Adders 50 08-23-2009 08:37 PM
New Methanol/Water injection, Coolingmist trunk mount 1.5 gal kit 92rohcp Power Adders 7 10-16-2008 06:47 PM
Coolingmist Water/Methanol Injection Kit F/S Macs Stang Power Adders 5 02-27-2008 11:19 AM
New Coolingmist Water/Methanol Injection Kit Brutal04 Power Adders 6 12-04-2006 04:52 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome