Join Date: Mar 2001
Location: Leonardtown, MD
Steeda front drag springs, $50
used on my mustang GT
part number 555-8230, front springs only. I am in Leonardtown MD
From Steeda's Website: Steeda's SuperLite Drag Race springs use a longer front coil that stores more energy to lift the front of the car during launch, aiding body rotation to transfer more weight to the rear tires for increased traction. The spring rates are tuned for improved traction at the strip, while maintaining good ride quality and acceptable handling on the street. Just like the name says, Steeda SuperLite Drag springs incorporate the latest manufacturing technology to reduce weight. Ride height is about the same as stock springs. However, because the springs are softer than stock, ride height may be more affected by the weight of the vehicle than it is by factory springs. Full-weight street cars typically sit 1/4 to 1/2 in. lower than stock. Lightweight race cars will sit a little higher.
Spring rate listed as 150 lbs/in.
I bought them for drag racing, but they handled fine on the street. They also lowered the front end by about 1 to 1.5 inches
T-trimmed black 99 GT
Terminator SB, 44cc TFS heads, HP292 cams,
RR intake, faceplated T56
20+ psi @ 7k, 10.327/136.14/1.417