For Sale SN95 '96-04 spindles and hubs - Ford Mustang Forums : Corral.net Mustang Forum
 1Likes
  • 1 Post By Jubi351
 
LinkBack Thread Tools Display Modes
post #1 of 16 Old 05-12-2018, 10:30 AM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Nov 1999
Location: Where the Navy sends me...
Posts: 4,123
SN95 '96-04 spindles and hubs

I grabbed these off a '00 at the junkyard a while back, but then ended up getting a complete set of Bullitt spindles/hubs/brakes, so I no longer need this set of spindles/hubs.

Passenger side hub had a couple of broken studs, so I replaced them all. Nothing special, just Dorman OE replacement studs.

As you can see, the driver side hub has the ABS tone ring on it, but the passenger side doesn't. Obviously the car got one side or the other replaced at some point. Both bearings feel good and tight, no play that I can detect. Donor car had not been hit in the front.

$125 shipped in the US for the pair.








'89 GT convertible, N/A 357W, MM front susp w/425# coil-overs and Koni D/As, MM TA/PB rear setup (Koni Yellows, 390-430# springs), Stoptech 332mm / 12" Baers, MM 6 point rollbar, Maier 1.5" flared fenders & quarters, 18x9.5" front/18x10.5" rear Enkei RPF-1s (street), 18x10" CCW C-10s (track), etc...
Patrick Olsen is offline  
Sponsored Links
Advertisement
 
post #2 of 16 Old 05-14-2018, 05:21 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Nov 1999
Location: Where the Navy sends me...
Posts: 4,123
If I'm out to lunch on the price, let me know. I realize many Fox 5-lug swappers want the '94/95 version to go with their stock K-member.

Patrick Olsen is offline  
post #3 of 16 Old 05-28-2018, 09:30 AM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Nov 1999
Location: Where the Navy sends me...
Posts: 4,123
Bump. Feel free to make an offer.
Patrick Olsen is offline  
Sponsored Links
Advertisement
 
post #4 of 16 Old 06-04-2018, 01:05 PM
Registered User
 
201FiveOH's Avatar
 
Trader Feedback: (12)
Join Date: Mar 2005
Location: Teaneck, NJ
Posts: 353
PM sent
201FiveOH is offline  
post #5 of 16 Old 06-23-2018, 09:17 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Nov 1999
Location: Where the Navy sends me...
Posts: 4,123
Sorry, 201FiveOH, I never got an email notification that you had replied to this thread or that you had PM'd me. Just responded to your PM.
Patrick Olsen is offline  
post #6 of 16 Old 07-23-2018, 12:06 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Nov 1999
Location: Where the Navy sends me...
Posts: 4,123
Still available, feel free to make an offer.
Patrick Olsen is offline  
post #7 of 16 Old 07-24-2018, 07:02 PM
Registered User
 
Hammer Down's Avatar
 
Trader Feedback: (5)
Join Date: Jun 2017
Location: Highland Mi
Posts: 184
Are they clean?
Hammer Down is offline  
post #8 of 16 Old 07-24-2018, 08:03 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Nov 1999
Location: Where the Navy sends me...
Posts: 4,123
Edit: Pictures should be back up in my original post. As you can see, no, they're not clean.
Patrick Olsen is offline  
post #9 of 16 Old 12-10-2018, 10:33 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Nov 1999
Location: Where the Navy sends me...
Posts: 4,123
Bump! Would make a great gift under the Christmas tree! Heck, you could probably use them as a tree stand to support the tree, then install them on the car after the holidays.

'89 GT convertible, N/A 357W, MM front susp w/425# coil-overs and Koni D/As, MM TA/PB rear setup (Koni Yellows, 390-430# springs), Stoptech 332mm / 12" Baers, MM 6 point rollbar, Maier 1.5" flared fenders & quarters, 18x9.5" front/18x10.5" rear Enkei RPF-1s (street), 18x10" CCW C-10s (track), etc...
Patrick Olsen is offline  
post #10 of 16 Old 01-27-2019, 11:03 AM
Registered User
 
CDW6212R's Avatar
 
Trader Feedback: (3)
Join Date: Dec 2007
Location: Knoxville, TN.
Posts: 2,210
Quick question; the 94/95 spindles are best for the Fox k-members, but is there any use for the 96-04 spindle for a different k-member in a Fox car? I have 96 spindles I just dug out, hoping they had been from a 94/95.


Don
92 Mark VII LSC SE - soon OBDII and 4R70, GTC kit and 347, custom paint.
98 Explorer Limited project to add 4WD, XP8 parts, KB blower, paint, 337.
99 Limited mail vehicle, SOHC 4WD, later 306/4R70W swap. 1998 Mountaineer spare. 72 Ranchero 351 Clevor project.
CDW6212R is offline  
post #11 of 16 Old 01-27-2019, 03:58 PM
Registered User
 
Trader Feedback: (36)
Join Date: Dec 2002
Location: Lincolnton, NC
Posts: 583
96-04 spindle is the only recommended spindle for use with MM k-member.

Sent from my Pixel using Tapatalk

Jarrod

'92 Coupe - Full MM suspension, koni SA, stock bottom end,stock cam,TW170,Systemax,V-2SQ,42s,Treadstone A2A 552h/541t out of fuel @ 5200 Kurgan tuned.
'80 Mercury Capri - 377, AFR 225s, ProRace Fogger 5.70 @ 127. SOLD
Jubi351 is offline  
post #12 of 16 Old 01-27-2019, 04:47 PM
Registered User
 
CDW6212R's Avatar
 
Trader Feedback: (3)
Join Date: Dec 2007
Location: Knoxville, TN.
Posts: 2,210
Quote:
Originally Posted by Jubi351 View Post
96-04 spindle is the only recommended spindle for use with MM k-member.

...

Is that the Fox MM k-member, and would that apply to any other brands?

Don
92 Mark VII LSC SE - soon OBDII and 4R70, GTC kit and 347, custom paint.
98 Explorer Limited project to add 4WD, XP8 parts, KB blower, paint, 337.
99 Limited mail vehicle, SOHC 4WD, later 306/4R70W swap. 1998 Mountaineer spare. 72 Ranchero 351 Clevor project.
CDW6212R is offline  
post #13 of 16 Old 01-27-2019, 04:59 PM
Registered User
 
Trader Feedback: (36)
Join Date: Dec 2002
Location: Lincolnton, NC
Posts: 583
Fox and SN MM k-members due to the revised suspension and steering mounting to provide a better roll center for handling. Most other k-members are designed for drag racing and lightweight but use all stock dimensions.

Sent from my Pixel using Tapatalk
CDW6212R likes this.

Jarrod

'92 Coupe - Full MM suspension, koni SA, stock bottom end,stock cam,TW170,Systemax,V-2SQ,42s,Treadstone A2A 552h/541t out of fuel @ 5200 Kurgan tuned.
'80 Mercury Capri - 377, AFR 225s, ProRace Fogger 5.70 @ 127. SOLD
Jubi351 is offline  
post #14 of 16 Old 01-27-2019, 10:32 PM
Registered User
 
Trader Feedback: (0)
Join Date: Oct 2018
Posts: 6
Interested if still avalible give me a call or text five16 52eight 343two
Plumber82 is offline  
post #15 of 16 Old 01-29-2019, 09:05 AM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Nov 1999
Location: Where the Navy sends me...
Posts: 4,123
Quote:
Originally Posted by Plumber82 View Post
Interested if still avalible give me a call or text five16 52eight 343two
Yes, they are still available.

'89 GT convertible, N/A 357W, MM front susp w/425# coil-overs and Koni D/As, MM TA/PB rear setup (Koni Yellows, 390-430# springs), Stoptech 332mm / 12" Baers, MM 6 point rollbar, Maier 1.5" flared fenders & quarters, 18x9.5" front/18x10.5" rear Enkei RPF-1s (street), 18x10" CCW C-10s (track), etc...
Patrick Olsen is offline  
post #16 of 16 Old 02-01-2019, 05:57 AM
Registered User
 
Trader Feedback: (0)
Join Date: Oct 2018
Posts: 6
Pm sent
Plumber82 is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale FS SN95 1994-1995 Spindles and Hubs (2) Sets $125.00 Shipped cencalc6 Suspension 21 03-31-2015 09:11 PM
For Sale SN95 94 spindles with hubs and studs. TaraFirma Suspension 5 12-23-2013 10:51 AM
For Sale 94-95 5 Lug SN95 Spindles, Hubs and Dust Shields 1slowhatch Suspension 5 10-13-2011 10:59 PM
For Sale 95 musang sn95 spindles and hubs fastcobra50 Suspension 11 08-29-2011 11:45 PM
For Sale Racecraft 2" Drop spindles with SN95 hubs xcoldricex Suspension 18 08-09-2011 08:56 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome