Ford Mustang Forums banner

Steeda rear lower control arms

551 views 7 replies 4 participants last post by  93teal03lx 
#1 · (Edited)
Selling my nice control arms and going back to stock.

part number 555-4420
Steeda Steel Lower Rear Control Arms - '79-'98

asking 129 obo

http://www.steeda.com/products/steel_lower_rear_control_arms.php


Product Details
Steeda's Steel Lower Control Arms really hook, for the lowest 60 ft. times and maximum control off corners. They are a direct bolt-on, with swaybar mounts located to clear differential stud girdles and T-Rex fuel pumps. Don't be fooled by imitators! Steeda's Aluminum lower rear control arms are the only ones that use our exclusive four part variable rate bushings to eliminate suspension bind and vibration while planting your tires to the pavement.

NOTE: *Does not fit 1999-2004 Cobra
The 4500 series is best for street cars, road racing, and occasional drag strip use.
The 4600 series is best for drag racers who consistently see 60 foot times of 1.65 or better, and for heavy (3500+lb) street and road race cars with more than 400 rear wheel horsepower.
Less NVH than arms with spherical bearings
1/2 the weight of the competition’s control arms
Hard bushing centers control the axle for maximum traction and handling
Softer outer bushings edges won't squeak or bind
Won't damage torque boxes like other arms with solid bushings
High-strength extruded 6061 T-6 Alum. eliminates flex & reduces unsprung weight 32%
1/3 the weight of lift bars!
Used by winners in NHRA, IHRA, SCCA, Fun Ford Weekend series, and the Ferrari-eating "Steeda Q" T-1 road racer.
Easy bolt on
Available with two bushing options to best suit your needs:
Bushing can be ordered separately to change your Steeda Aluminum Control Arms from one type to another. Attention serious racers! Custom bushings are available to tune you car.
 
See less See more
You have insufficient privileges to reply here.
Top