Corral Elite Member
Join Date: Dec 1999
Location: San Antonio, TX
2013 Coyote Mustang 5k miles Billet Pump Boss Exh cams NOT a wreck
I decided to go in a different direction with my latest build so have some nice parts for sale.
2013 Mustang GT Coyote motor with only 5k miles. This is not from a wreck but was pulled to put an Aluminator in. Looks new inside. After buying the engine I installed a billet oil pump gear replacing the stock cast gear which has been shown to be a failure point in these engines with a billet gear that is rated at over 2000hp. I also installed Boss 302R exhaust cams and springs. 0 miles on these.
The cost of parts and installation of those two items alone would run several thousand dollars. This is as new as you'll find without buying a crate motor but with key upgrades to run higher RPM. Throw on a Boss/Cobra Jet or GT350 intake and spin it to 8k rpm. Includes wiring harness. GT350 intake not included but will sell with engine if you want for another $800. Won't sell intake alone as it will go on my Aluminator. You can find a stock intake for $50 on Ebay or CL.
First $5000 takes it.
[U][B]White 89 LX conv Coyote crate motor, MM front rear suspension, T56 Magnum, Cobra Brakes, 18x9 and 18x10 w NT05, custom leather Saleen flofits [B][U]89 Red Notch- Forged Coyote, 04 IRS, Magnum, Enkei, Brembos, Mach 1 interior 91 GT 347 Dart Big Bore, Vortech Ti , Viper T56, full MM suspension, Brembo. Under construction: Coupe, rotisserie, mini tub, 3 piece custom 18x13 wheels, Recaro, Brembo, Aluminator, Whipple, 6r80 paddle shifted