Join Date: Aug 2008
Location: Corpus Christi, Tx
Cams 4.6 3v "Testing Waters"
Thinking bout selling them and seeing if anyone is interested. They have about 7,000 miles on them. Great cams I like them a lot, just been looking at something a little different. Cams are Comp Cams and a VSR set so you WILL need springs and retainers. You get a noticeable difference at idle but not anything radical. These are good for someone who wants just a little bit more grunt with out alot of noise. Cams where purchased from Evolution Performance.
Asking $400 + shipping, If within 200 miles from Corpus Christi Tx I will meet half way.
•Basic Operating RPM Range: 1,000-6,000 <-- says 6'000 but I was still making power till 6400 when I let out on the dyno.
•Intake Duration at 050 inch Lift: 222
•Exhaust Duration at 050 inch Lift: 235
•Duration at 050 inch Lift: 222 int./235 exh.
•Advertised Intake Duration: 261
•Advertised Exhaust Duration: 278
•Advertised Duration: 261 int./278 exh
•Intake Valve Lift with Factory Rocker Arm Ratio: 0.490 in.
•Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.480 in.
•Valve Lift with Factory Rocker Arm Ratio: 0.490 int./0.480 exh. lift
•Lobe Separation (degrees): 115.5
•Grind Number: XE261H-115.5
Last edited by 07StangGuy; 06-20-2009 at 11:33 AM.