using stock booster with 94-95 cobra mc. - Ford Mustang Forums : Corral.net Mustang Forum
 
LinkBack Thread Tools Display Modes
post #1 of 5 Old 09-17-2009, 01:50 PM Thread Starter
Registered User
 
fivespeedsteed's Avatar
 
Trader Feedback: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 395
using stock booster with 94-95 cobra mc.

maximum motorsports told me it was okay to use the stock fox booster with the 94-95 cobra 15/16 bore mc. is this true? i always thought that i had to do the 93 cobra one?

im running the 10th aniv. cobra calipers front and rear.


1990 GT hatch 5 speed
fivespeedsteed is offline  
Sponsored Links
Advertisement
 
post #2 of 5 Old 09-17-2009, 03:14 PM
Registered User
 
Trader Feedback: (0)
Join Date: Aug 2002
Location: At the apex, blocking your pass.
Posts: 2,133
Quote:
Originally Posted by fivespeedsteed View Post
maximum motorsports told me it was okay to use the stock fox booster with the 94-95 cobra 15/16 bore mc. is this true? i always thought that i had to do the 93 cobra one?
It's perfectly fine. I use the factory '88 booster in my AI car.

All the booster does is determine the pedal effort (not the pedal travel.) If you set everything up and the effort is too high, you can install the larger Cobra booster if you like. I like a hard pedal so I stayed with the smaller Fox booster.


-- Robert King
NASA AI #42, Texas
Instructor, NASA Texas Region
Instructor, TWS Perf. Driving School
gt40mkII is offline  
post #3 of 5 Old 09-18-2009, 11:37 AM Thread Starter
Registered User
 
fivespeedsteed's Avatar
 
Trader Feedback: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 395
and the 15/16 94-95 cobra master cyl is what i want for cobra calipers all around?

1990 GT hatch 5 speed
fivespeedsteed is offline  
Sponsored Links
Advertisement
 
post #4 of 5 Old 09-18-2009, 11:52 AM
Registered User
 
Trader Feedback: (0)
Join Date: Aug 2002
Location: At the apex, blocking your pass.
Posts: 2,133
Quote:
Originally Posted by fivespeedsteed View Post
and the 15/16 94-95 cobra master cyl is what i want for cobra calipers all around?
Probably.

Ford initially went with a 1" master cylinder on the '93 Cobra R. Some folks complained about the hard, short pedal so they changed to a 15/16" master cylinder to give a little more pedal travel and a slightly softer pedal. Most folks seem to like it.

I stayed with the harder pedal.

-- Robert King
NASA AI #42, Texas
Instructor, NASA Texas Region
Instructor, TWS Perf. Driving School
gt40mkII is offline  
post #5 of 5 Old 09-18-2009, 12:23 PM Thread Starter
Registered User
 
fivespeedsteed's Avatar
 
Trader Feedback: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 395
now what lines do i need in the rear?

http://www.maximummotorsports.com/in...oducts_id=1224

ive got the nrc brackets that came with the fittings to cut and flare my lines, and the front i know i need the fox with sn95cobra brakes coarse thread.

1990 GT hatch 5 speed
fivespeedsteed is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
1993 Cobra Master Cylinder and booster on stock brakes 90topdown General Mustang Tech 2 10-07-2007 08:26 PM
all stock 5.0 brakes + 1993 cobra booster = ? Kevins89notch5.0 General Mustang Tech 2 02-19-2007 03:14 AM
Stock booster over Cobra..? Rich92GT General Mustang Tech 4 02-16-2006 11:49 AM
Difference in using a Stock Booster Vs Cobra when converting to Cobra brakes on Fox? adam699 General Mustang Tech 3 04-18-2003 09:43 AM
Cobra brake booster on stock set-up 89gete General Mustang Tech 7 06-12-2002 03:31 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome