Selling or trading NiteMare since my plan of a raffle went South. I never really planned to keep this car even tho it drives like a dream and runs incredible. Problem for me is no rear shoulder belts and I have a smaller kid who wants to ride oh and 4 doors makes it nice. $12.500 obo I have receipts to show $19.000. Trades welcome.
Here are some specs. 865 661 4453 Dan
Car started life ordered from a dealer in south east FL. 1986 Mustang
LX 5.0 5 speed with no power, add A/C and sunroof with 3.27 posi rear.
I am the 3rd owner bought from Fl. Matt at Fox body restoration owned
this car and used this car to showcase their interior products at
shows. When I purchased the car we discussed its 1st owner who owned
it since new till I believe 2008 or so when Matt purchased the
vehicle, he bought it because of it's incredible factory condition. I
do have a front and back color copy of the original title.
85 Roller block Square decked 0.10.
Bored .030 compression 10.25-1
H bearings used throughout
Scat cast stroker crank,knife edged and all holes chamfered
Rods are forged steel I beam with ARP rod bolts.
Pistons Probe flat top forged with dual valve reliefes for TF heads
or straight. P3471F-030
Rings are moly Probe, their best.
Oil pump,oil pan and pickup new stock Ford.
Double tru roller cloyes timing chain
Pioneer race balancer 28oz
Pioneer timing pointer
Assembly balanced to 1/2 gram
Cam is Comp Cams 35-518-8 Int dur 274 Ex dur 282, Int lift 555 ex
lift 565 lobe sep 112
Heads are Trick Flow TW fast as cast. 190cc int runner cnc chamner
64cc c/chamber. 2.02 1.60 valves. TFS-51400015
Rocker arms PRW stainless full roller 1.6 ratio 7/16 stud.
Pushrods Trick flow Chromoly 6.700 length 5/16
Cometic head gaskets.
HV PC black water pump.
Intake Edelbrock Performaer RPM II
75 MM Accufab TB
Anderson Powerpipe CAI
New fan and fan clutch
All new hoses,new belt
All fastners new
Pulleys powdercoated black
Alternator brackett powdercoated black
New belt tensioner powdercoated black
Factory PCM with Diablosport chip and custom tune. Tuned By Robert Hindman
MSD billet Dist
New factory electrical ignition switch
New factory alternator
Innovate LC-2 Wideband O2 with digital gauge
New factory O2 sensors
30lb Ford Injectors with matching Pro M MAF
255 LPH walboro pump.
Billet adj fuel pressure regulator.
BBK 1 " 5/8 Chrome headers.
BBK off road h pipe
Flowmaster cat back polished tips
Trans stock T5 out of a 91 due to stronger internals. Trans updated
with stronger parts 1000 miles ago.
Steeda Triax shifter with Cobra leather knob
Ford Racing billet steel flywheel 28oz
Ford King cobra clutch
Adj clutch qudrant
Ford Racing alum driveshaft
Factory 8.8 rear with Moser 31 spline axles
3.73 Frod racing gear
Ford Racing Carbon fiber clutch posi unti
Front UPR chromoly K member with control arms
Steeda Bumpsteer kit
Flaming river Manual steering rack
Eibach pro sturts with UPR coil overs
UPR Caster/Camber plates
Eibach sway bar with mounts
Tubular upper C/ arms with Urethane bushings
Steeda weight jacker lower tubular control arms
Eibach pro springs
Eibach rear sway bar
New master cylinder
New front brake hoses
Stock front with drilled rotors
Stock rear all new
ROH Hammer 17x9 front 17x10.5 rear
Tires. Nitto 555R front 245/45/17 Rear 275/40/17 1000 miles
2 pod pillar gauge mount
New Corbeau GTS II seats with new full seat tracks
Recon center console
Cluster removed and reconditioned
New door panels
All newer hardware inside
New leather Grant Corsa steering wheel with CF inserts.
Entire floor of car covered in Cool it sound and heat suppressor
Sony CD and speakers
Boss racing 3.25" Cowl hood.