CAR IS SOLD!!!!! Thanks Corral
Well after much thought.....I'm seeing if there is interest in my garage kept 85 GT....I have not put more than 2,500 miles on it in 2-3 years....I built it to be a mean street sleeper and occasional track car. I don't need to sell it but if I'm given a fair offer for it, I would let it go.
The car has gone a best of 11:70's @ 120 mph on the included E.T. Streets
Details of car.......
Motor has 7,500 miles on it
349 Ci/ 10:75 compression balanced,blueprinted, Block has been "Zero" decked, Edelbrock double roller chain/ KB forged pistons/ Skat forged crank
Stage 2 Eagle "H" rods/ Crome Moly rings gapped for Nitrous (I never sprayed the car) It is plenty fast for me!
Ported Edelbrock Torker II Intake
Underdrive Pulleys/ Flex Fan
New 600 vac sec carb for cruising....650/750 cfm Holley ProForm DP with adj. air bleeds for best performance....Both will be sold with the car...
I get 21 mpg with the 600 believe it or not....
Crower 15513 Stage 3 Cam 228/234/@.50 518/531 with a 112 cl "really nice cam" Lumpy idle but is perfect street strip cam.
Ford Racing GT 40 "Y" Aluminum heads milled .015 thou. 1.94 Int. valves 1.60 fitted exhaust valves
1.6 Pro-Form Roller Rockers
Tremec 3550 5 speed w/3.27 1st gear Centerforce Dual Friction Clutch
1 5/8 Shorty's into a new 2 1/2" O/R X system....The X section is from UPR
New Trans mount and crossmember, driveshaft loop (not installed)
New Granatelli Upper and Lower control arms and shocks
8.8 Rear with 3.73's "new" about 2000 miles ago all new parts with 4 clutches per axle (stock3) all new seals and bearings......Instant lockup/ Granatelli Rear Support Girdle
4" Cowl Hood.....In Black Primer....Car is Jalapeno' Red Original Paint not perfect but looks really good for 24 yr old paint....The car has only seen rain 4 times since I've owned it....
15" Rodlites on the car with 2 extra rims with the ET Streets
Original 10 Hole Rims in the basement go with the car and all center caps
Dual Snorkle air cleaner and inlet tubes all there
MSD 6 Box with newer Ford Racing Wires and plugs. I still have the original window sticker and owners manual in the dealership bag.....
I forgot to mention in that the car has a high torque mini-starter installed due to the compression, all the hardware internally as well as externally is A.R.P and I installed a Holley electric fuel pump also....
Here's a couple of links to You Tube for idle clips.....The first link is with the 3" H pipe exhaust with Flo Pro twister mufflers.....The second is with the X pipe and Thrush Chambered 2.5 inch system I put on at the end of last summer......
I'd like to get between $5,500 and $6,000 for it......It is well worth it....Even in this economy!
I'll email pics to whoever has an interest......Thanks Stazy.