For Sale 1967 Mustang Convertible - Ford Mustang Forums : Mustang Forum
LinkBack Thread Tools Display Modes
post #1 of 1 Old 06-17-2014, 06:02 PM Thread Starter
Registered User
Trader Feedback: (0)
Join Date: Jun 2014
Location: Indiana
Posts: 1
1967 Mustang Convertible

Up for sale is my pony that I have owned for the last 29 years. She was a project car when I found her (a graduation gift) and I have either replace or rebuilt everything on her. I have taken her to numerous car shows and she has won trophies - even a best of show. She was in Mustang Monthly back in 1996.

For the drivetrain, the 302 engine has less than 700 miles on her. The block is a '71 Mexican 302 block. The pistons and crank were replaced and rods reconditioned. I installed reconditioned early 351W heads and a Ford Motorsport cam shaft. It has a F4B intake with Holley carb. It has 289 hypo style exhaust manifolds. The radiator is the big block style with matching fan shroud, fan and fan clutch. The trans is a rebuilt C4 with larger 1-2 servo and shift kit. The rear axle is from a Lincoln Versialles (yes, 4 wheel disc) and the 3.50 posi is housed in a nodular or N case. The trans and 3rd member have about 4,500 miles on them.

The suspension and steering has been either completely replace or rebuilt.

This pony has lots of options including fog light, power disc brakes, power steering, power top, pop open gas cap, reat panel grilles, in-dash tack, in-dash clock, in-dash air, console, convenience group, tilt/swing away steering column (it works! I posted a YouTube video of it), deluxe steering wheel, deluxe seat belts, comfortweave seats, deluxe door panels, and lower door grills with lights. Also installed are sequential turn signals, remote trunk lock, Shelby style side scopes, pony floor matts, a Shelby T shifter handle, ram air shaker, California Speical style hood pins, and lots of chrome and aircraft braided lines. I also install mahagony wood panels on the dash, console, and door panels. They are only clear coated and match the maroon/parchment interior. The top is new and parchment in color.

The frame is rock solid. I replaced the inner rockers, torque boxes and floor pans.

Please either email me at [email protected] or call 765-477-6588 if you have any questions or would like more pictures. I'm asking $26,500.

Thank you for your interest,

Attached Images
File Type: jpg June 8 2014 413.jpg (94.9 KB, 30 views)
File Type: jpg June 8 2014 415.jpg (83.9 KB, 32 views)
File Type: jpg June 8 2014 408.jpg (83.6 KB, 25 views)
File Type: jpg June 8 2014 419.jpg (88.1 KB, 36 views)
File Type: jpg June 8 2014 433.jpg (125.5 KB, 35 views)
MysticMustang is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the Ford Mustang Forums : Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
American Traditions, Hot Rods, and Horses; 2013 Mustang review and roadtrip story stevegolf Lounge 0 11-18-2013 09:21 AM
For Sale FS: 1967 Mustang Convertible - Classic Yellow jaydh39 Mustangs For Sale/Wanted 1978 and older 1 06-28-2013 11:19 PM
Looking for other members with cylinder 8 failures 19kobra99 S-197 Mustang GT (2011-2014) 63 07-29-2011 07:27 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome