looking to possible trade my 93 coupe for an old mustang - Ford Mustang Forums : Corral.net Mustang Forum
LinkBack Thread Tools Display Modes
post #1 of 1 Old 04-10-2009, 05:12 PM Thread Starter
Registered User
silver93's Avatar
Trader Feedback: (30)
Join Date: Oct 2007
Location: addis,La
Posts: 757
looking to possible trade my 93 coupe for an old mustang



351 bore 60 with main girldle
comp nitrious cam i will have to look it up im not sure on the specs i looked at it on the website once and i cost $303 for it
7 quart pan
track heat heads
victor jr intake
holley 750hp carb
1 3/4 long tube with x-pipe and dumps
the motor is 10:1 and it does not run over 175 degrees since ive been driving it
the timing is set 34 degrees also
i bought the motor from sampson1 on corral here he built it and im sure he can answer any questions i cant. the motor runs real strong and runs about 45 to 50 pounds of oil pressure.

kieth hunter built the c-4 about 6 passes on it. reverse manual valve body, trans brake and a ptc 9 1/2 converter 3800 stall on brake

msd 6al
master blaster 3 coil
msd distributor
msd two step module
powermaster 130amp alternator

aeromotive a1000 fuel pump
stock tank sumped from aeromotive
all braided lines 10an feed and 8an return
aeromotive regulator that is made for the a1000 pump and carb setup

8 point roll cage made to fit around the factory interior it come from wildride suspension
subframe connector
90/10 lakewoods
adj upper
drag lower
qa1 adj. shocks
aluminuim drive shaft
4 cylinder springs

built 8.8 with moser 33 spline axle
c-clip eliminator
373 gears
the battery is in the trunk
i just had bought the hood 4 inch cowl brand new for the 351 and a lot of the other parts are brand new also

i just put the 5inch monster silver tach with shift light
has oil pressure gauge
and i still have the boost gauge from when the car was s/c

all black interior is still in the car

im sure im leaving some thing out but i think that is about it. when i took it out the car had a 1.7 60foot. on the brake with the slick it should cut some high1.4 or low 1.5. i think it will run low 11 on motor and with a 200 shot it should go high 9's. i just put over 5000 in it with the carb setup along. 8000 grand takes it home. still have the tags on the car it is street legal.

silver93 is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
1991 Mustang LX Coupe - Paxton Novi, 302, 5 spd, custom paint & interior, Welds, etc! MiDiablo Mustangs For Sale/Wanted, 1987-1993 36 07-09-2011 09:58 PM
1992 Mustang Coupe 10 Second All Motor Driver ERStettin Mustangs For Sale/Wanted, 1987-1993 9 06-15-2009 01:14 AM
2000 Mustang Gt Coupe track car jfranci3 Mustangs For Sale/Wanted, 1999-2004 5 04-26-2009 03:17 PM
1993 Ford Mustang 5.0 Coupe 5-speed Luke87GT Mustangs For Sale/Wanted, 1987-1993 64 03-17-2009 02:07 AM
1993 Mustang Coupe Road Race Car 4V GT Mustangs For Sale/Wanted, 1987-1993 8 03-10-2009 01:20 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome