fox blinker issue - Ford Mustang Forums : Corral.net Mustang Forum
 
LinkBack Thread Tools Display Modes
post #1 of 4 Old 08-02-2017, 10:33 AM Thread Starter
Registered User
 
Trader Feedback: (0)
Join Date: May 2017
Posts: 23
fox blinker issue

Gentlemen and women car in question is 91 notch v8.

I am at a loss. I had the car for 10yrs, 5yrs ago it went to paint.... and longstory just showed back up with a myraid of issues. 1 being blinkers are not working.

Sofar what i have done... replaced both relays 1 in fuse panel other pass side of radio (blinker). Verified 12v at both. Followed up to the hazard switch verified orange wire wht trace and blue wire. Followed over to column... i just found a diagram of the column plugs so i will try to jump a 12v feed in there (as i have 2 blinker multifunction switches that are tested and working. Check harness grounds in front and back. when switch is on (left or right) i get a faint solid dashboard light (btw hazards work fine).... i am only getting 6v at the plug (i cleaned them aswell) no matter which switch i try, 6v no higher no less at every corner

thanks


jim

jiml302 is offline  
Sponsored Links
Advertisement
 
post #2 of 4 Old 08-03-2017, 06:53 AM
Registered User
 
Saleen153's Avatar
 
Trader Feedback: (8)
Join Date: Jul 2000
Location: Harwich, MA
Posts: 73
I had a similar issue years ago, it ended up being the ignition switch

Saleen153 is offline  
post #3 of 4 Old 08-03-2017, 06:58 AM Thread Starter
Registered User
 
Trader Feedback: (0)
Join Date: May 2017
Posts: 23
Quote:
Originally Posted by Saleen153 View Post
I had a similar issue years ago, it ended up being the ignition switch
replaced that 3 months ago, old one fell apart
jiml302 is offline  
Sponsored Links
Advertisement
 
post #4 of 4 Old 08-03-2017, 07:54 PM
Registered User
 
indy2000's Avatar
 
Trader Feedback: (3)
Join Date: Oct 2001
Location: vancouver
Posts: 21,253
the flasher is the FIRST thing after the fuse

you have to check the rest of the circuit

it goes through the hazard switch>>multifunction switch>>lamps

if you got 6v volts at the lamps

you have a problem between the flasher and lamps

89 GT gr-40, KB2200(10psi), tweecer R/T,LC-1, 22gal cell, w/tailpipes.
indy2000 is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Fitment Issue: 03-04 Termi Clone Rims 17x8 on Fox seriousmustangnut Wheels and Tires 8 01-31-2015 06:26 PM
electrical issue fox body drain dentguru General Mustang Tech 9 09-09-2014 08:18 AM
My Fox made the March '13 issue of MM&FF!! FiveLiterFox Lounge 16 02-28-2013 11:13 AM
Fox guys with 93 cobra wheels, are you grinding? franco802 Wheels and Tires 9 12-10-2011 10:21 PM
NBC, CBS Most Pro-Democratic; ABC, FOX Most Balanced INCINR8 Politics 13 10-20-2011 11:14 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome