Power seats stopped working (moved from 94/95 Tech) - Ford Mustang Forums : Corral.net Mustang Forum
LinkBack Thread Tools Display Modes
post #1 of 4 Old 06-24-2002, 01:28 PM Thread Starter
Trader Feedback: (0)
Join Date: Dec 2001
Posts: 6
Power seats stopped working (moved from 94/95 Tech)

My wife drove the car yesterday and ran the seat all the way forward. Now the seat will not go back! The power lumber also will not work. I looked in the owner manual looking for a fuse but found none! Where do I start? There is a HIGH current fuse for the lumber, does that supply the seat up/down back/forward control as well?

sgarifo is offline  
Sponsored Links
post #2 of 4 Old 06-24-2002, 02:31 PM
Registered User
Trader Feedback: (0)
Join Date: Nov 2000
Location: Royal Oak, MI, USA
Posts: 5
I've got a similar problem. The power works, but won't move the seat forward.... only back. Up and down is ok in mine.

I've had a similar problem to yours in the past. It's because before my wife drove the car I had the seat out to install the seat extenders, and I didn't fully attach the connectors under the seat when I put it back in. When she powered the seat forward it pulled the connectors apart leaving the seat powerless.

I just reached under the seat and connected the wires. I suppose something similar could have happened in your case.

94 teal GT 5 speed, pullies, hypertech chip, 3.55s, K&N, hurst shifter, offroad h-pipe, 14.8 @ 95.5mph.
GoGreen is offline  
post #3 of 4 Old 06-24-2002, 02:33 PM
Trader Feedback: (0)
Join Date: Aug 2000
Posts: 131
The fuse for power seat is Right in front of the Drivers side strut tower under the little black cover.

It's one of the smaller fuses, like a 15 amp or so. The seat fuses will pop if the button is held down for any extensive amount of time. Maybe you can try a higher amp fuse like I did.

Good Luck
Timanator is offline  
Sponsored Links
post #4 of 4 Old 06-25-2002, 03:02 AM
Registered User
952Top's Avatar
Trader Feedback: (0)
Join Date: Jan 2000
Location: Ohio USA
Posts: 218
If I move my seat all the way forward, it pulls the connectors apart. I also had a problem with the lumbar in the seat. It turned out to be a leak in it.

95 Cobra convertible w/removable hardtop. Vortech S- Trim ~MANY Mods including fordchip.com tune- 421 rwhp/398.7rwtq
1990 Mustang GT Auto
1993 Mustang GT 5 Speed Project
952Top is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale Rare 94/95 GT power sterring pump pulley ShadyZealot Windsor Engine Parts 1 09-26-2014 11:20 AM
99 power seat in a 96 that didnt have power seats? epicslow5.0 GT & SOHC 0 06-10-2014 10:39 PM
Fuel/Tming curves-Computer question? (thread moved from 94/95 Engine Tech) poostang EEC Tech 12 05-12-2002 09:52 PM
Mod Shootout 4v power adder class rules Dave King GT & SOHC 10 12-20-2001 03:51 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome