strange tire wear on et streets?
Heres my setup:
15x10x6.5 weld draglites
26x10.5x15 ET Streets bias ply
usually end up around 10.5 to 11 psi in tires
I am getting allot of wear on the outside and inside edges from the edge of the tire to about 3" in from there. The middle of the tires have most of the grooves left.
Could it be underinflation? Too small a tire on that rim? They dont seem to hook very well unless I drop them below 11.5 pounds.
Someone point me in the right direction here please.