track update!! baseline suspensions rear setup. - Ford Mustang Forums : Corral.net Mustang Forum
 
LinkBack Thread Tools Display Modes
post #1 of 16 Old 07-20-2008, 12:23 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Jan 2005
Location: Oklahoma
Posts: 711
track update!! baseline suspensions rear setup.

FIRST OFF THANKS TO KEVIN AT BASELINE SUSPENSIONS!!!!!!!!!!!!! THE SUSPENSION WORKS LIKE CRAZY!!!!

i had a autoweld chassis arb in my car that was junk!!

i have basline uppers so i went with a baseline ARB also.

before the baseline arb the car was unmanagable. it never made a clean 1/8 or 1/4 pass. the body would twist so bad at launch the car would never settle down and go straight.

heres the update!!!

i went to Sooner Motorplex in lawton,ok to run in the 6.40 1/8 class. i had to use the baby pills and let off early to run the number.

first pass i ran it through to see where i was at. it was in the heat! car ran better every pass.

1st qual 1.32 60' 3.93 330' 6.13 @ 110.86 http://www.youtube.com/watch?v=Rul5W-U05JY

2nd qual 1.33 60' 3.93 330' 6.34 @ 88.76 http://www.youtube.com/watch?v=sK2vKXMoSuA

1st elim 1.29 60' 3.94 330' 6.58 @ 76.36 http://www.youtube.com/watch?v=0B9Zayr_LMc

2nd elim 1.26 60' 3.85 330' 6.50 @ 81.71 http://www.youtube.com/watch?v=thRuGKNNfqg

3rd elim 1.27 60' 3.85 330' 6.46 @ 80.21 http://www.youtube.com/watch?v=pgSvQHj76xo


2000 GT aka S2000
*NA 347* - TFS Street Heat Heads, T&D Shaft Rockers, Comp Cams Solid Roller, Super Vic Intake, Holley 950
Kooks SS 2" headers, 3.5" Dr.Gas X-pipe, 3.5" Magnaflow mufflers, TKO 600, Built 8.8, 4.88 gears, 26X10's
9.78 @ 138.88 w/1.38 60' - Still working on it
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
trevnut is offline  
Sponsored Links
Advertisement
 
post #2 of 16 Old 07-20-2008, 01:24 PM
Registered User
 
ARCANGL's Avatar
 
Trader Feedback: (76)
Join Date: Feb 2007
Location: Ocean Springs, MS
Posts: 12,251
Garage
very nice man... glad to see Kevin's stuff working for you.

i hope it does for me too


11 SHO - Tuxedo Black - Livernois MyCal 4+ tune, K&N Typhoon, Stainless Works downpipes, Magnaflow Tru-X mid-muffler/Dynomax UltraFlo's, 170* t-stat, H&R Sports

04 GT - Comp Orange - John Tymensky Boss Block/3.80 stroker, Foxlake TFS', Hellion kit w/ Comp CT5 Turbo, MM cage, Team Z/MM suspension
ARCANGL is offline  
post #3 of 16 Old 07-20-2008, 05:25 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Jan 2005
Location: Oklahoma
Posts: 711
set it up like he says and it should!

2000 GT aka S2000
*NA 347* - TFS Street Heat Heads, T&D Shaft Rockers, Comp Cams Solid Roller, Super Vic Intake, Holley 950
Kooks SS 2" headers, 3.5" Dr.Gas X-pipe, 3.5" Magnaflow mufflers, TKO 600, Built 8.8, 4.88 gears, 26X10's
9.78 @ 138.88 w/1.38 60' - Still working on it
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
trevnut is offline  
Sponsored Links
Advertisement
 
post #4 of 16 Old 07-20-2008, 05:59 PM
Registered User
 
Nutzz's Avatar
 
Trader Feedback: (39)
Join Date: Apr 2005
Location: TN
Posts: 5,933
awsome 60ft..

TOO_NUTS Racing
N/A- Pump Gas- 408 Clevor - [email protected]
Best 60ft on stock type suspension 1.28
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
UPR UCA/ Megabyte lowers/ stock anti roll bar. No battle boxes!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nutzz is offline  
post #5 of 16 Old 07-20-2008, 07:28 PM
Registered User
 
The Sarge's Avatar
 
Trader Feedback: (1)
Join Date: Dec 2006
Location: C.C., Tx
Posts: 230
60ft

That's some badass 60 ft's. Good Job!
The Sarge is offline  
post #6 of 16 Old 07-20-2008, 08:33 PM
Registered User
 
88OrangeLX's Avatar
 
Trader Feedback: (6)
Join Date: May 2004
Location: Kentucky
Posts: 2,465
Whats up with your MPH, 110 all the way down to 88. It doesn't sound like you are lifting until after you cross the traps.

Car hooks awesome, I can't wait to put Kevins uppers and ARB on my car.

New times coming soon.....
88OrangeLX is offline  
post #7 of 16 Old 07-21-2008, 12:22 AM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Jan 2005
Location: Oklahoma
Posts: 711
Quote:
Originally Posted by 88OrangeLX View Post
Whats up with your MPH, 110 all the way down to 88. It doesn't sound like you are lifting until after you cross the traps.

Car hooks awesome, I can't wait to put Kevins uppers and ARB on my car.
it slowed down to 76 on one pass. you hear the other cars. i was lettin off at the 330' mark.

2000 GT aka S2000
*NA 347* - TFS Street Heat Heads, T&D Shaft Rockers, Comp Cams Solid Roller, Super Vic Intake, Holley 950
Kooks SS 2" headers, 3.5" Dr.Gas X-pipe, 3.5" Magnaflow mufflers, TKO 600, Built 8.8, 4.88 gears, 26X10's
9.78 @ 138.88 w/1.38 60' - Still working on it
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
trevnut is offline  
post #8 of 16 Old 07-21-2008, 03:09 AM
Registered User
 
Trader Feedback: (3)
Join Date: May 2002
Location: Northern, VA
Posts: 2,780
Do you have a lean hole? It looked like something was getting hot under the car???? Glowing or something??????

Right bank...

O.G. X275 racer
1.17 60' [email protected] with the angry peanut!
1.16 60' [email protected] on 1 gun (In testing)
88gtguy is offline  
post #9 of 16 Old 07-21-2008, 09:03 AM
Registered User
 
Trader Feedback: (0)
Join Date: Mar 2000
Location: Albert Lea, MN USA
Posts: 410
trevnut,
Nice 60's! what does the rest of your suspension consist of? Tires? Are you using the weld inbetween the frame rails ARB or the one that welds/bolts to the trunk floor? thanks...


Troy

79' pace car, blow-threw jytt,stock 302, c4.
10.66 at 126.5
79Sleeper is offline  
post #10 of 16 Old 07-21-2008, 10:33 AM
Registered User
 
nos8ed's Avatar
 
Trader Feedback: (1)
Join Date: Nov 2007
Location: Mustang, OK
Posts: 2,097
Your car is hookin' like a mofo!


90 GT 331 C4 [email protected]
1993 Cobra Black
nos8ed is offline  
post #11 of 16 Old 07-21-2008, 07:18 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Jan 2005
Location: Oklahoma
Posts: 711
Quote:
Originally Posted by 88gtguy View Post
Do you have a lean hole? It looked like something was getting hot under the car???? Glowing or something??????

Right bank...
its the light gleaming off yhe polished stainless muffler

2000 GT aka S2000
*NA 347* - TFS Street Heat Heads, T&D Shaft Rockers, Comp Cams Solid Roller, Super Vic Intake, Holley 950
Kooks SS 2" headers, 3.5" Dr.Gas X-pipe, 3.5" Magnaflow mufflers, TKO 600, Built 8.8, 4.88 gears, 26X10's
9.78 @ 138.88 w/1.38 60' - Still working on it
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
trevnut is offline  
post #12 of 16 Old 07-21-2008, 07:49 PM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Jan 2005
Location: Oklahoma
Posts: 711
Quote:
Originally Posted by 79Sleeper View Post
trevnut,
Nice 60's! what does the rest of your suspension consist of? Tires? Are you using the weld inbetween the frame rails ARB or the one that welds/bolts to the trunk floor? thanks...


Troy
front is upr k-member and a-arms, strange 10-way struts with 14" 175lb coilovers (i had 14" 130lb but the front sat to low)

in the rear i have baseline pro-launch 2 uppers, baseline trac-locator, custom made dbl adj lowers, coilovers, and baseline ARB # 3

2000 GT aka S2000
*NA 347* - TFS Street Heat Heads, T&D Shaft Rockers, Comp Cams Solid Roller, Super Vic Intake, Holley 950
Kooks SS 2" headers, 3.5" Dr.Gas X-pipe, 3.5" Magnaflow mufflers, TKO 600, Built 8.8, 4.88 gears, 26X10's
9.78 @ 138.88 w/1.38 60' - Still working on it
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
trevnut is offline  
post #13 of 16 Old 07-26-2008, 03:10 AM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Jan 2005
Location: Oklahoma
Posts: 711
went a [email protected] tonight. WOOOOHOOOOO!!!!!

2000 GT aka S2000
*NA 347* - TFS Street Heat Heads, T&D Shaft Rockers, Comp Cams Solid Roller, Super Vic Intake, Holley 950
Kooks SS 2" headers, 3.5" Dr.Gas X-pipe, 3.5" Magnaflow mufflers, TKO 600, Built 8.8, 4.88 gears, 26X10's
9.78 @ 138.88 w/1.38 60' - Still working on it
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
trevnut is offline  
post #14 of 16 Old 07-26-2008, 10:40 PM
Registered User
 
Trader Feedback: (0)
Join Date: Oct 2002
Location: The best place in the world
Posts: 2,990
That's the way I want my car to 60' and it will as soon as I get off my ass and make a couple of changes. What gears do you have?

88 coupe, 351 cleveland, unported 4V heads, buddy rawls custom solid roller, diamond domes, 6'' h-beam rods, stock 4bolt block/crank, holley strip dominator, 950HP holley, hoosier 28x10, 90/10s, UPR pro rear kit
nonstroked, stock iron heads and NO NITROUS!!!!!!!!
[email protected] / [email protected] (1/8th)
All Cleveland is offline  
post #15 of 16 Old 07-27-2008, 02:34 AM Thread Starter
Registered User
 
Trader Feedback: (11)
Join Date: Jan 2005
Location: Oklahoma
Posts: 711
3.73's with 28's

2000 GT aka S2000
*NA 347* - TFS Street Heat Heads, T&D Shaft Rockers, Comp Cams Solid Roller, Super Vic Intake, Holley 950
Kooks SS 2" headers, 3.5" Dr.Gas X-pipe, 3.5" Magnaflow mufflers, TKO 600, Built 8.8, 4.88 gears, 26X10's
9.78 @ 138.88 w/1.38 60' - Still working on it
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
trevnut is offline  
post #16 of 16 Old 07-27-2008, 11:57 AM
Registered User
 
ARCANGL's Avatar
 
Trader Feedback: (76)
Join Date: Feb 2007
Location: Ocean Springs, MS
Posts: 12,251
Garage
Quote:
Originally Posted by trevnut View Post
front is upr k-member and a-arms, strange 10-way struts with 14" 175lb coilovers (i had 14" 130lb but the front sat to low)

in the rear i have baseline pro-launch 2 uppers, baseline trac-locator, custom made dbl adj lowers, coilovers, and baseline ARB # 3

we are very similar... i have Tokico 5-way drags up front, but same K and same springs

out back i have Pro-launch 2's, ARB 2, Track locator, LCA 1, but no coilovers. Im on stock GT springs and Tokico 5-ways

hope it works well as a combo. If not... i guess coil-overs will be soon behind

11 SHO - Tuxedo Black - Livernois MyCal 4+ tune, K&N Typhoon, Stainless Works downpipes, Magnaflow Tru-X mid-muffler/Dynomax UltraFlo's, 170* t-stat, H&R Sports

04 GT - Comp Orange - John Tymensky Boss Block/3.80 stroker, Foxlake TFS', Hellion kit w/ Comp CT5 Turbo, MM cage, Team Z/MM suspension
ARCANGL is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Mustang Forums : Corral.net Mustang Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome