Ford Mustang Forums : Corral.net Mustang Forum - View Single Post - Vortech S-Trim rebuild instructions inside
View Single Post
post #22 of Old 05-26-2006, 03:32 PM
Forced
Registered User
 
Forced's Avatar
 
Trader Feedback: (0)
Join Date: Dec 2000
Location: SoCal
Posts: 96
Quote:
Originally Posted by Dedicated5.0
How about offering some constructive criticism instead of being a smartass.

That bearing is for the low-speed input side. It is the exact same bearing that Vortech uses. It is the high-speed side that spins to 50,000 rpm. But you knew that already didn’t you? Seems to me that you are just trying to freak people out and make them think that Vortech is the only people can work on these blowers.
That bearing is NOT the same one that we use! The bearings we use are made for us...Like I said in the other post about this topic...you cannot purchase the bearings and seals that we use. If these work for you and do not cause future failures, then congrats. The blower is your property you can do with it as you wish. What I don't like is when they get rebuilt incorrectly and fail again. This leads to a "My Vortech Broke Again" mentality. This is not good for us.

-StevieP
The guy that used to be at the other place, but isn't anymore.
Forced is offline  
 
 
For the best viewing experience please update your browser to Google Chrome